 | 2015 First year an Xilinx 7 series based product or Zynq based product passed into semifinals for the Trip To Space A small step for those on the way to All Programmable ... ... world? |  |
Table of Contents
Overview
TE0722 Zynq Module is without DDR, special FSBL is needed to startup correctly see, DDR less ZYNQ Design
Power supply
TE0722 need external 3.3V power supply. It is possible but not recommended to supply TE0722 with TE0790 programmer, but only for small designs (max ~100mA over XMOD possible).
If TE0722 is powered via XMOD (max. ~ 100mA), use XMOD DIP-Switch:
| POS | Value |
|---|---|
| 1 | ON |
| 2 | OFF |
| 3 | ON |
| 4 | ON |
If TE0722 is powered with external 3.3V, use XMOD DIP-Switch:
| POS | Value |
|---|---|
| 1 | ON |
| 2 | OFF |
| 3 | OFF |
| 4 | OFF |
DIP-Switches
There are no DIPs on TE0722. In case of TE0790 (XMOD) usage, see power supply section.
LEDs
Working in process. Will be coming soon.
JTAG/UART
JTAG and UART is possible over J3 connector.
Use XMOD (TE0790) Programmer
XMOD Programmer support JTAG and UART over same USB cable.
- XMOD DIP Switch settings: See power supply section
- XMOD Firmware: Special XMOD CPLD Firmware is needed, see: TE0790 CPLD Firmware Firmware(SC-PGM-TE0790-0203_XMOD_DIP40-01_20170426) is available on : TE0790 Download Area/<Revision>/Firmware
Use other JTAG Programmer
With other Programmer only JTAG is possible. UART must be connected separate.
| TE0722-J2 Pin | TE0722-Name | Platform Cable - Name | Platform Cable - Color | external power supply |
|---|---|---|---|---|
| 1 | GND | -- | -- | GND |
| 2 | GND | GND | black | -- |
| 3 | B34_L4_N(def. UART TX) | -- | -- | -- |
| 4 | TCK | TCK | yellow | -- |
| 5 | 3.3V | VREF | red | -- |
| 6 | 3.3V | -- | -- | 3.3V |
| 7 | B34_L10_P(def. UART RX) | -- | -- | -- |
| 8 | TMS | TMS | green | -- |
| 9 | TDI | TDI | white | -- |
| 10 | TDO | TDO | violet | -- |
Reference Designs
Notes
Overview
Content Tools