Download PDF version of this document.
| Company | Trenz Electronic GmbH |
|---|---|
| PCN Number | PCN-2020327 |
| Title | TE0808-03 to TE0808-04 Hardware Revision Change |
| Subject | Hardware Revision Change |
| Issue Date | JJJJMMDD |
Products Affected
This change affects all Trenz Electronic TE0808 SoMs of revsion 03: TE0808-03*.
Affected Product | Replacement |
|---|---|
| TE0808-04-* | TE0808-05-* |
Changes
#1 Revised PL_VCCINT power supply.
Type: PCB change
Reason:
Impact: Up to 30A PL core current available.
#2 Added signal BG1, revised routing and placement of DDR4
Type: Schematic change
Reason: Add support of new packages of DDP DDR4 ICs.
Impact: DDP DDR4 now supporteted. Assembling four 32Gb DDDP DDR4 packages a maximum of 16GB RAM is now supported.
#3 R5 value changed to 49.9 Ohm and connected to VCCO
Type: Schematic change
Reason: Xilinx recommondation UG583.
Impact: R5 pulled up to VCCO_PSDDR.
#4 Added test points
Type: Schematic change
Reason: Improve factory testability.
Impact: Atomatic testing possible.
#5 Added MAC EEPROM U4 and I2C pullups
Type: Schematic change
Reason:
Impact: User EEPROM accesible via I2C bus PLL_SCL/SDA. Added pull up resistor to I2C bus
#6 Revised FPGA location
Type: PCB change
Reason: Improve Layout
Impact: Package placed 1.5mm closer to connector J3.
Method of Identification
Production Shipment Schedule
From XXXXX, after old stock is gone. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20200327)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.
Overview
Content Tools