Table of contents
CPLD Access
Remove TEC0850 from Backplane
Set DIP S1:1 to OFF
Connect 12V Power source
Connect Arrow USB Programmer
CPLD Programming
Run Quartus Prime Lite Edition
Click
to run "Programmer"
If you see "No Hardware"
:
Click "Hardware Setup..." and select "Arrow-USB-Blaster"
Press
and select *.pof file to program.
Check "Program/Configure" checkboxes
Press
After the end of programming, progress bar should show you
Available CPLD Firmware
- Firmware description
TEC0850 MAX10 - SMB
Firmware