You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
DEWESoft device (Generation 2)
TE USB FX2 module starts as a DEWESoft device (at power on) (Generation 2) when
- Generation 2 firmware is correctly stored in FX2 microcontroller's EEPROM;
- the EEPROM connection is enabled when the TE USB FX2 module is powered on.
- DEWESoft driver is not installed
![](https://wiki.trenz-electronic.de/download/attachments/10616994/Device%20Manager_DEWESoftUnknow.png?version=1&modificationDate=1376411999479&api=v2)
- DEWESoft driver is installed
![](https://wiki.trenz-electronic.de/download/attachments/10616850/devmgmt-gen2-TE.png?version=1&modificationDate=1376057860000&api=v2)
OR (if you have installed the previous version of driver).
![](https://wiki.trenz-electronic.de/download/attachments/10616850/devmgmt-gen2-DW.png?version=1&modificationDate=1376058145000&api=v2)
TE device (Generation 3)
TE USB FX2 module starts as a TE device (at power on) (Generation 3) when
- Generation 3 firmware is correctly stored in FX2 microcontroller's EEPROM;
- the EEPROM connection is enabled when the TE USB FX2 module is powered on.
- TE USB FX2 driver is not installed.
![](https://wiki.trenz-electronic.de/download/attachments/3834297/Device%20Manager_TEUnknow.png?version=1&modificationDate=1376563437388&api=v2)
- TE USB FX2 driver is installed.
![](https://wiki.trenz-electronic.de/download/attachments/10616850/devmgmt-gen3.png?version=1&modificationDate=1375894430000&api=v2)
Cypress device (Recovery procedure)
TE USB FX2 module starts as a Cypress device (at power on) when
- the EEPROM connection is disabled when the TE USB FX2 module is powered on.