You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »

Download PDF version of this document.

Table of Contents

Overview

The Trenz Electronic TEBT0782 is a carrier for TE0782, TE0783 and TE0784 module.

Refer to http://trenz.org/tebt0782-info for the current online version of this manual and other available documentation.

Key Features

  • 3 x Samtec ASP-122953-01 160-pin stackable, compatible with TE0782
  • 2 mm MC LB2-A Soldered Connector for power supply (12V input)
  • 4 SMA connectors for MGT
  • 2 x 12 pin headers for XMOD
  • 1 x DIP switch for modules CPLD Access
  • 2 x RJ45 Connector
  • USB A Stacked Connector 
  • Equipped with two XMOD FTDI JTAG adapters, TE0790 and TE0790-xxL
  • Voltage regulator for 5V and 3.3V
  • Dimension: 115 x 115 mm
  • Two preassembled TE0790 XMOD FTDI JTAG adapters

Block Diagram

TEBT0782 block diagram

Main Components

TEBT0782 main components
  1. RJ45 Transceivers, J1-J2
  2. USB A Stacked, U7
  3. XMOD JTAG/UART Adapter, J7
  4. JTAG CPLD Adapter -J8
  5. 2 Line Common Mode Choke, J10
  6. Non-isolated power jack (VIN), J9-J11
  7. DIP Switch, S1
  8. SMA Coxial Connectors (MGT_TX), J3-J4
  9. SMA Coxial Connectors (MGT_RX), J5-J6
  10. Board to Board Connector, JB1
  11. Board to Board Connector, JB3
  12. Board to Board Connector, JB2

Initial Delivery State

Storage device name

Content

Notes

-

-

-

Initial delivery state of programmable devices on the module

Configuration Signals

Signal

B2BNote

RESIN

JBC3-130Board Reset
Reset process.

Signals, Interfaces and Pins

Board to Board (B2B) I/Os

FPGA bank number and number of I/O signals connected to the B2B connector:

B2B ConnectorInterfaceNumber of I/ONotes
JB1








RJ45, J1B-J1C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J1A4 Differential pair, 8 Single EndedPHY1 MDIO
RJ45, J2B-J2C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J2A4 Differential pair, 8 Single EndedPHY2 MDIO
TE0790 Base, J84 Single Ended
TE0790 Base, J71 Single Ended
USB A Stacked, U72 Single EndedUSB
Power Switch, U12 Single Ended
SMD Line Filter, L61 Differential pair, 2 Single EndedUSB1_D
SMD Line Filter, L71 Differential pair, 2 Single EndedUSB2_D
ESD protection diode, U51 Single EndedUSB1_VBUS
ESD protection diode, U81 Single EndedUSB2_VBUS
JB2

Module TE078x FPGA, Bank 111-11216 Differential pair, 32 Single EndedMGT_RX8...15, MGT_TX8...15
Module TE078x FPGA, Bank 341 Differential pair, 2 Single Ended

J1_B34_VRP, J1_B34_VRN

Module TE078x FPGA, Bank 341 Differential pair, 2 Single EndedJ1_B33_VRP, J1_B33_VRN
JB3



TE0790 Base, J84 Single EndedM_TCK, M_TMS, M_TDO, M_TDI
TE0790 Base, J7

4 Single Ended

2 Single Ended

1 Single Ended

TCK, TMS, TDO, TDI

UART RX/TX

RESIN

DIP Switch, S1-A1 Single EndedJTAGENB
SMA Coaxial, J3...62 Differential pair, 4 Single EndedMGT_RX0, MGT_TX0
Module TE0782...4 FPGA, Bank 109-11016 Differential pair, 32 Single EndedMGT_RX1...7, MGT_TX0...7
General I/O to B2B connectors information

JTAG Interface

JTAGs access to the TE078x SoM are available through B2B connector JB3.  

JTAG Signal

B2B Connector

Notes
M_TMSJB3B-182JTAG
M_TDIJB3B-187JTAG
M_TDOJB3B-188JTAG
M_TCKJB3B-181JTAG
JTAG pins connection

JTAG access to the LCMXO2-1200HC System Controller CPLD is provided through B2B connector J3.

Pin J3-136 'JTAGENB' of B2B connector J3 is used to access the JTAG interface of the SC CPLD. Set it high using DIP Switch S1-A in order to program the System Controller CPLD via JTAG interaface.

JTAG Signal

B2B Connector

Notes
TMSJB3C-142CPLD JTAG
TDIJB3C-147CPLD JTAG
TDOJB3C-148CPLD JTAG
TCK

JB3C-141

CPLD JTAG
CPLD JTAG pins connection

RJ45 Connectors

Signal NameRJ45-J1 PinRJ45-J2 PinNotes
B2B
PHY_MDI0_PJB1A-23JB1A-39
PHY_MDI0_NJB1A-21JB1A-37
PHY_MDI1_PJB1A-19JB1A-35
PHY_MDI1_NJB1A-17JB1A-33
PHY_MDI2_PJB1A-15JB1A-31
PHY_MDI2_NJB1A-13JB1A-29
PHY_MDI3_PJB1A-11JB1A-27
PHY_MDI3_NJB1A-9JB1A-25
J2_TX9_PJB1A-95-LED Green/Yellow
J2_TX9_NJB1A-97-LED Green/Yellow
J2_RX9_N-JB1A-96LED Green/Yellow
J2_RX9_P-JB1A-98LED Green/Yellow
RJ45s Connections to B2B Connectors

USB A Stacked

The USB A Stacked, U7 is a dual port USB Socket which provides two USB ports.

Signal NamePort APort BNotes
B2BConnected to B2BConnected to 
USB_D_PJB1A-28SMD Line Filter, L7JB1A-40SMD Line Filter, L6
USB_D_NJB1A-26SMD Line Filter, L7JB1A-38SMD Line Filter, L6
USB_VBUSJB1A-24SMD Line Filter, L7JB1A-36SMD Line Filter, L6
VBUS_V_ENJB1A-30Power Switch, U1 JB1A-32Power Switch, U1 
Dual Port USB Connections

SMA Coaxial 

The TEBT0782 carrier is equipped with 4x SMA Coaxial straight connectors.

Designator SchematicB2BNotes
J3MGT_TX0_NJB3A-29
J4MGT_TX0_PJB3A-31
J5MGT_RX0_NJB3A-30
J6MGT_RX0_PJB3A-32
SMAs Connections

Test Points

Test Point

Signals

B2B Connector

Notes
1VBAT_IJB3-124
2OTG2_IDJB1-22
3OTG1_IDJB1-34
4USB1_VBUSJB1-36
5USB2_VBUSJB1-24
6M_TCKJB3-81
7M_TDOJB3-88
8M_TDIJB3-87
9M_TMSJB3-82
10TCKJB3-141
11TDOJB3-148
12TDIJB3-147
13TMSJB3-142
14VINJB1-165...168
155V-
163.3V_CPLDJB1-147...148
17-18GND-
Test Points Information

On-board Peripherals

Chip/InterfaceDesignatorNotes
DIP SwitchS1
On board peripherals

DIP Switch

SwitchConnected to B2BNotes
S1-AJTABENBJB3C-136
S1-B...D--Not connected
DIP Switch Connections

Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of 3 A for system startup is recommended.

Power Consumption

Power Input PinTypical Current
VINTBD*
Power Consumption

* TBD - To Be Determined

Power Distribution Dependencies

12V Power Supply (VIN) on J9/J11 (2 mm MC LB2-A solder-in) or on J10 (TE1.5/2-3.5H).

|


Power Distribution

Power-On Sequence

Power Sequency

Power Rails

Power Rail Name

B2B JM1 Pin

B2B JM2 Pin

B2B JM3 Pin

DirectionNotes
VIN165, 166, 167, 168--Input/OutputDirectly to module
3.3V_M99, 100, 111,112, 123, 124, 135, 136, 159, 160, 169, 170, 171, 172-99, 100, 159, 160Output
3.3V_CPLD147,148--OutputDirectly to module
1.8V_M-99,100, 159, 160, 169, 170, 171, 172124Output
Module power rails.

Board to Board Connectors

The TEBT0782 has three 160-pin double-row ASP-122953-01  Samtec connectors which mate with ASP-122952-01 Samtec connectors on the module. Mating height is 5 mm.

Technical Specifications

Absolute Maximum Ratings

SymbolsDescriptionMinMaxUnitNote
VINInput supply voltage012V
T_STGStorage Temperature-40+85°CDIP Switch S1
PS absolute maximum ratings

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

ParameterMinMaxUnitsReference Document
VIN1212VSee TE078x TRMs
T_OPT-40+85°C
Recommended operating conditions.

Physical Dimensions

  • Module size: 116 mm × 116 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 5 mm.

PCB thickness: 1.6 mm.

Physical Dimension

Currently Offered Variants 

Trenz shop TEBT0728 overview page
English pageGerman page
Trenz Electronic Shop Overview

Revision History

Hardware Revision History


DateRevisionChangesDocumentation Link
2016-11-0501-REV01
Hardware Revision History

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Board hardware revision number.

Document Change History

DateRevisionContributorDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • change list

--

all

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • --
Document change history.

Disclaimer

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


  • No labels