You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

This Trenz Electronic Starter Kit  consists of a TE0803 module on a TEBF0808 base board in Mini-ITX Enclosure.  See Shop Link for detailed content.

TE0803 UltraSOM+ - Wiki with TRM, reference projects, application notes and more

TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations

Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC

Project Delivery - General descriptions of reference designs and content

TE0803 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more

TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more

TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more

TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

Shop TE0803-Starter-Kit - contains prices, order number, content...

Xilinx Software and Driver

Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation. Vivado Webpack XCZU3CG/EG support will be available from Version 2017.1 .

Xilinx Download Area - All Xilinx Software, Device Models and Libraries

Important Notes

Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM

ES devices are not included in all Vivado versions, for ES1 only:

activate beta device see: FAQ - How can I activate beta devices?

For all Starter Kit's shipped before 2017-06-21:

Enclosure Power and HD LED was swapped on connector. See  "Starter Kit Cable Connection - Enclosure Power Button , Reset Button, HDD LED and Power LED" section for correct connection.

Getting Started

Starter Kit is shipped with prebuilt Linux Example on SD. Newest version and sources are available on our download area: TE0803 Reference Designs

  1. Connect main power and set power switch to on. See Main Power Enclosure Location

  2. Connect mini USB cable from XMOD with green dot to host PC. See XMODs Connection
  3. Insert SD-Card with pre-loaded content into SD-Card slot.
  4. Open Serial Console:
    1. COM Port: for correct number see device manager
    2. Speed:115200
  5. Press the Power on button on the enclosure. See Power Button, Reset Button, HDD LED and Power LED Enclosure Location
  6. Linux login:
    1. User Name:root
    2. Password:root

Starter Kit Basic

Main Power Enclosure Location

Power Button , Reset Button, HDD LED and Power LED Enclosure  Location

 

 Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM
TEBF0808

TE0790-02

(with green dot)

TE0790-02L
DIP-SchalterS4
S4.1OFF
S4.2OFF
S4.3OFF
S4.4ON
DIP-SchalterS5
S5.1ON
S5.2ON
S5.3OFF
S5.4OFF
 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF
 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF

For more information, see:TEBF0808

Starter Kit will be shipped with all cable connected.

ATX Power

Module

FMC FAN

XMODs

Enclosure USB

Enclosure FAN1 and HDAUDIO

Enclosure Power Button , Reset Button, HDD LED and Power LED

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de

  • No labels