You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 8 Next »
Download PDF version of this document.
The Trenz Electronic TEG2000 is an industrial-grade FPGA module integrating a CologneChip GateMate A1 FPGA, a 16 MByte QSPI Flash, level shifter, LEDs and several clocking and power components necessary for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. All this on a tiny footprint, smaller than a credit card size at a very competitive price. All Trenz Electronic SoMs in 4 x 5 cm form factor are mechanically compatible.
Refer to http://trenz.org/tec0850-info for the current online version of this manual and other available documentation.
25 MHz Clock Oscillator
LEDs (two status LEDs and one user LED)
Plug-on-Modul with 2 x 100-Pin Razor Beam B2B connector
Supply voltages: either 3.3V or 3.3V and 5V
Storage device name | Content | Notes |
---|---|---|
Quad SPI Flash | Blinky Demo Design | U5 |
Connector Type | Designator | Interface | IO CNT | Notes |
---|---|---|---|---|
Samtec 100 Pin B2B connector | JM1, Group 7 | SerDes | 8 | |
Samtec 100 Pin B2B connector | JM1, Group 1 | GPIO | 48 | Bank NB/EB/EA, powered by VCCIOA |
Samtec 100 Pin B2B connector | JM1, Group 6 | GPIO | 6 | up to 3.3V due to level shifter, connected to Bank SB |
Samtec 100 Pin B2B connector | JM1, Group 5 | GPIO | 6 | up to 1.8V, also connected to Bank SB |
Samtec 100 Pin B2B connector | JM1 | configuration Signals | 3 | EN1, PGOOD , MODE |
Samtec 100 Pin B2B connector | JM2, Group 4 | GPIO | 50 | Bank NA/WB/WC, powered by VCCIOD |
Samtec 100 Pin B2B connector | JM2, Group 3 | GPIO | 18 | Bank SA, powered by VCCIOC |
Samtec 100 Pin B2B connector | JM2 | JTAG | 4 | 0..3.3VIN |
Samtec 100 Pin B2B connector | JM2 | MR | 1 | low active Reset |
Test Point | Signal | Side | Notes1) |
---|---|---|---|
TP1 | NA_6_N TP1 | top | FPGA IO |
TP2 | NA_6_P | top | FPGA IO |
TP3 | NB_B3 | top | FPGA IO |
TP4 | NB_A3 | top | FPGA IO |
TP5 | 1V | bottom | 1V power rail |
TP6 | DONE | bottom | FPGA CFG_DONE pin |
TP7 | PROG_B | bottom | FPGA RST_N pin |
TP8 | GND | bottom | |
TP9 | GND | bottom | |
TP10 | 1V | top | 1V power rail |
TP11 | 1.8V | top | OUT, 1.8V power rail |
TP12 | VIN | top | VIN (3.3 - 5.0V) |
TP13 | 3.3VIN | top | |
TP14 | 3.3V | top | OUT, 3.3V power rail |
TP15 | VCCIOA | top | IN 1.1V ... 2.7V, powers IO Banks NB/EB/EA |
TP16 | VCCIOC | top | IN 1.1V ... 2.7V, powers IO Bank SA |
TP17 | VCCIOD | top | IN 1.1V ... 2.7V, powers IO Banks NA/WB/WC |
TP18 | DONE | top | FPGA CFG_DONE pin |
TP19 | PROG_B | top | FPGA RST_N pin |
TP20 | GND | top | |
TP21 | GND | top | |
TP22 | FAILED_n | bottom | FPGA CFG_FAILED pin |
TP23 | FAILED_n | top | FPGA CFG_FAILED pin |
1) Direction:
Chip/Interface | Designator | Connected To | Notes |
---|---|---|---|
JTAG | U1 | FPGA Bank WA | |
QSPI Flash | U5 | FPGA Bank CFG WA | SPIx4 Interface for FPGA configuration |
Oscillator | U3 | FPGA Bank SB, Pin IO_SB_A8 | 25 MHz |
Oscillator | U10 | JM1, Pin 16 & 18 | differential 100 MHz Clock for Gigabit-Transceiver |
Connector+Pin | Signal Name | Direction1) | Description |
---|---|---|---|
JM1 | EN1 | IN | activates DC-DCs |
JM1 | PGOOD | OUT | Output from power monitor |
JM1 | MODE | IN | configuration mode - 0 → JTAG or 1 → SPI active Mode |
JM2 | MR | IN | low active Reset connected to the Power Monitor that triggers PROG_B (FPGA RST_N) |
JM2 | JTAG | JTAG interface for FPGA configuration or QSPI Flash programming |
1) Direction:
Power Rail Name/ Schematic Name | Connector + Pin | Direction1) | Notes |
---|---|---|---|
VIN | JM1 - 1,3,5; JM2 - 2,4,6,8 | IN | 3.3-5.0V, Micromodule Power |
3.3VIN | JM1 - 13,15 | IN | Micromodule Power |
VCCIOA | JM1 - 9,11 | IN | |
VCCIOC | JM2 - 5 | IN | |
VCCIOD | JM2 - 7,9 | IN | |
3.3V | JM2 - 10,12,91 | OUT | Power for Carrier, powers on module the level shifter, LEDs and control Pins |
1.8V | JM1 - 39 | OUT | Power for Carrier, powers on module the Flash, FPGA VDD and Banks SB,WA |
1V | -- | -- | Powers on module the FPGA core, PLLs and SerDes interface |
1) Direction:
According to CologneChip ds1001, there are no restrictions concerning order of voltage switch-on.
Sequence | Net name | Recommended Voltage Range | Pull-up/down | Description | Notes |
---|---|---|---|---|---|
1 | 3.3VIN | 3.3V(± 5 %) | -- | Main power supply | Main module power supply. 0.5 A minimum. Power consumption depends mainly on design and cooling solution. |
2 | VIN | 3.3 - 5.0V(± 5 %) | -- | Main power supply | |
3 | VCCIOA, VCCIOC, VCCIOD | 1.1V - 2.7V | -- | Bank Voltages | 1.8V on TE0703 Carrier |
Power Rail Name/ Schematic Name | Description | Min | Max | Unit |
---|---|---|---|---|
VIN | Micromodule Power | 3,135 | 5,25 | V |
3.3VIN | Micromodule Power | 3,135 | 3,465 | V |
VCCIOA | Bank NB/EB/EA voltage | 1.1 | 2.75 | V |
VCCIOC | Bank SA voltage | 1.1 | 2.75 | V |
VCCIOD | Bank NA/WB/WC voltage | 1.1 | 2.75 | V |
temperature range: | industrial | -20 | +85 | °C |
*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these
or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
VIN | 3,135 | 5,25 | V | See page 2 in schematic - Supported Voltage Ranges |
3.3VIN | 3,135 | 3,465 | V | " |
VCCIOA | 1.1 | 2.75 | V | " |
VCCIOC | 1.1 | 2.75 | V | " |
VCCIOD | 1.1 | 2.75 | V | " |
temperature range | -20 | +85 | °C | ? |
Module size: 40 mm × 50 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8 mm.
PCB thickness: 1.4 mm.
All dimensions are shown in millimeters.
Trenz shop TEG2000 overview page | |
---|---|
English page | German page |
Create DrawIO object here: Attention if you copy from other page, objects are only linked.
Date | Revision | Changes | Documentation Link | |
---|---|---|---|---|
2024-04-17 | 01 |
| PCN | TEG2000-01 |
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Date | Revision | Contributor | Description |
---|---|---|---|
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
-- | all | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]