Introduction
This write-up is intended to guide customers / users in their first steps in
BLABLA → Nutzer dabei zu Unterstützen eigene Designs für das Board zu entwickeln / Die Möglichkeiten / Ideen umzusetzen...
Users who intend to expand the hardware Fähigkeiten des Boards Änderungen des Bootprozesses ODER einfach nur einen
tieferen Einblick / leichten Einstieg in die Nutzung der Entwicklungsumgebung haben wollen..
Wird gezeigt, am BEISPIEL DER HARD
Table of content:
Page 1 - Intel Quartus Project
Begin -
Setup a project in Quartus, use the Plattform Designer to generate interconnection logic for the plattform / your design
Goal -
Compile the project to get the required files and folders in the next steps
[plattformDesigner.sopinfo file and (hps_isw_)handoff folder]
Page 2 - Generation of the pre and main bootloader / u-boot
Use the handoff folder to generate the preloader and main bootloader
[preloader-mkpimage.bin u-boot.img]
Page 3 - Generation of the Device Tree Blob
Use the plattformDesigner.sopinfo file to generate the device tree
[dts and dtb]