To indirect program SPI Flash using Xilinx iMPACT do following steps:
- Connect JTAG cable to corresponding module connector (see JTAG connector).
- Connect JTAG cable to host computer with installed Xilinx iMPACT software.
- Power-on module by external power supply source or by USB cable.
- Run Xilinx iMPACT.
- Select Boundary Scan mode.
- After initialization iMPACT window should look like
Image Modified Right click on FPGA image and select "Add SPI/BPI Flash..." from menu.
Image Modified
- Select mcs file to program.
- Select SPI Flash type corresponding to your module type and revision.
Image Modified
- Right click on Flash image and select "Program" from menu.
Image Modified
- Leave default programming properties and press "OK".
Image Modified
- Wait for operation to complete.
- After completion iMPACT window should show "Program Succeeded" sign.
Image Modified