Page History

...

1. Connect micro USB to PC.
2. Connect 5V Power supply.
3. Select CPLD JTAG by putting dip switch S1-4 in position ON.
4. Export Serial Vector Format File (SVF)
   1. Open Project in Quartus Programmer
   2. make sure pof file is selected for programming, if not remove sof file and add pof file.
   3. Go to menu:  → "File" → "Create JAM, JBC, SVF or ISC File..."
   4. Select File format svf.
   5. Set TCK Frequenzy to 15 MHz.
   6. Export by clicking OK. If no other location was defined, the gernerated file is in the project folder.

Image RemovedImage Added

...