...
Table 13: XMOD adapter board DIP-switch positions for voltage configuration.
Note |
---|
Use Xilinx compatible TE0790 adapter board (designation TE-0790-xx with out 'L') to program the Zynq device. The TE0790 adapter board's CPLD have to be configured with the Standard variant of the firmware. Refer to the TE0790 Resources Site for further information and firmware download. |
HTML |
---|
<!-- Components on the Module, like Flash, PLL, PHY... --> |
...
Table 14: DIP-Switch S2 SoM configuration settings.
If TE0729 is mounted, following bootmodes can be configured by setting the DIP-switches S2-2 and S2-3:
Boot Modes Configuration via DIP-switch S2 with default TE7029 CPLD FirmwareBoot Mode | S2-2 | S2-3 |
---|---|---|
JTAG | ON | ON |
SD | OFF | OFF |
QSPI | ON | OFF |
Table 15: Bootmode configuration via DIP-switch S2.The selected bootmode via DIP-switch S2 depends also on the current configured SC CPLD firmware on the mounted SoM and may vary.
The Carrier Board VCCIO for the PL IO-banks of the mounted SoM are selectable by the jumpers J6 and J7.
...
The TE0729 module has two 120-pin double-row REF-189019-02 connectors on the bottom side which are compatible with Samtec BSE-060-01-L-D-A connectors. Mating connectors on the baseboard are REF-189019-01, which are compatible with Samtec BTE-060-01-L-D-A connectors.
Order | REF Number | Samtec Number | Type | Mated Height | Data sheet | Comment |
---|---|---|---|---|---|---|
- | REF-189019-02 | BTE-060-01-L-D-A-K-TR | Module connector | 5 mm | http://suddendocs.samtec.com/catalog_english/bte.pdf | Standard connector used on module |
26663 | REF-189019-01 | BSE-060-01-L-D-A-TR | Baseboard connector | 5 mm | http://suddendocs.samtec.com/catalog_english/bse.pdf | Standard connector used on board |
...
Date | Revision | Notes | PCN | Documentation Link |
---|---|---|---|---|
- | 01 |
| - | TEB0729-01 |
- | 02 |
| - | TEB0729-02 |
...
Date | Revision | Contributors | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| Ali Naseri |
|
Table 29: Document change history.
...