Page History

^*used as reference

Content

Additional HW Requirements:

Content

For general structure and of the reference design, see Project Delivery - AMD devices

Design Sources

Additional Sources

Prebuilt

Download

Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx AMD Software for the same Project.

Reference Design is available on:

• TE0725 "Test Board" Reference Design

Design Flow

Trenz Electronic provides a tcl based built environment based on Xilinx AMD Design Flow.

See also:

• AMD Development Tools#XilinxSoftware-BasicUserGuides
• Vivado Projects - TE Reference Design
•  Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx AMD Vivado/Vitis GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:

   Code Block
   language bash theme Midnight title _create_win_setup.cmd/_create_linux_setup.sh
   ------------------------Set design paths---------------------------- -- Run Design with: _create_win_setup -- Use Design Path: <absolute project path> -------------------------------------------------------------------- -------------------------TE Reference Design--------------------------- -------------------------------------------------------------------- -- (0) Module selection guide, project creation...prebuilt export... -- (1) Create minimum setup of CMD-Files and exit Batch -- (2) Create maximum setup of CMD-Files and exit Batch -- (3) (internal only) Dev -- (4) (internal only) Prod -- (c) Go to CMD-File Generation (Manual setup) -- (d) Go to Documentation (Web Documentation) -- (g) Install Board Files from Xilinx Board Store (beta) -- (a) Start design with unsupported Vivado Version (beta) -- (x) Exit Batch (nothing is done!) ---- Select (ex.:'0' for module selection guide):

   
   

2. Press 0 and enter to start "Module Selection Guide"
3. Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
   

   • optional for manual changes: Select correct device and Xilinx Vivado install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"

     Note
     Note: Select correct one, see also Vivado Board Part Flow

     1. Create hardware description file (.xsa file) for PetaLinux project and export to prebuilt folder

        Code Block
        language py theme Midnight title run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>")
        TE::hw_build_design -export_prebuilt

        
        

        Info
        Using Vivado GUI is the same, except file export to prebuilt folder.

        
        

4. Generate Programming Files with Vitis

   Code Block
   language py theme Midnight title run on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv")
   TE::sw_run_vitis -all TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)

   
   

   Info
   Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" App from Firmware folder will be add into BlockRAM. If you add other app, you must select *.elf manually on Vivado

   
   

   Note
   TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis

   (optional) Copy Application (hello_te0725.elf) from prebuilt-folder into \firmware\microblaze_0\ and regenerate design with

   Code Block
   language py theme Midnight title run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>")
   TE::hw_build_design -export_prebuilt

Launch

Programming

Xilinx AMD documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
2. Press 0 and enter to start "Module Selection Guide"
   1. Select assembly version
   2. Validate selection

   3. Select create and open delivery binary folder

      Info
      Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated

      
      

QSPI

-Boot mode

         Option for *.mcs file on QSPI Flash

1. Connect Connect JTAG and power on carrier with module

2. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"

   
   

   Code Block
   language py theme Midnight title run on Vivado TCL (Script programs .mcs-File on QSPI flash)
   TE::pr_program_flash -swapp hello_te0725_bootldr

   
   

3. Press the reset button to start the application and see the output in the console

SD

Not used on this Example.

JTAG

1. Connect JTAG and power on PCB
2. Open Vivado HW Manager
3. Program FPGA with Bitfile from "prebuilt\hardware\<short dir>\"

Usage

1. Prepare HW like described on section Programming
2. Connect UART USB (most cases same as JTAG)

3. 
   

   Expand
   title boot process
   1. FPGA Loads Bitfile from Flash 3. Hello Trenz will be run on UART console.   info: Do not reboot, if Bitfile programming over JTAG is used as programming method. UART Open Serial Console (e.g. putty) Hello TE0725 will run on endless loop. Speed: 9600 COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1) Image RemovedImage Added Power On PCB (Do not restart, if you use Bitfile programming)

   
   

Vivado HW Manager

• VIO Core for signal control and monitoring is not implemented

System Design - Vivado

Block Design

Image Removed

draw.io Diagram
border true diagramName Blockdiagram_TE0725_23-2 simpleViewer false width links auto tbstyle top lbox true diagramWidth 1474 revision 1

Constraints

Basic module constraints

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 66 [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design]
set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]

set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]

Design specific constraints

---

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 50 [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design]
set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]

set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]

set_property PACKAGE_PIN T5 [get_ports clk_crystal_i]
set_property IOSTANDARD LVCMOS33 [get_ports clk_crystal_i]

Design specific constraints

set_property PACKAGE_PIN A13 [get_ports HB_CLK0_0]
set_property PACKAGE_PIN A14 [get_ports HB_CLK0n_0]

set_property PACKAGE_PIN E17 [get_ports {HB_dq_0[0]}]
set_property PACKAGE_PIN B17 [get_ports {HB_dq_0[1]}]
set_property PACKAGE_PIN F18 [get_ports {HB_dq_0[2]}]
set_property PACKAGE_PIN F16 [get_ports {HB_dq_0[3]}]
set_property PACKAGE_PIN G17 [get_ports {HB_dq_0[4]}]
set_property PACKAGE_PIN D18 [get_ports {HB_dq_0[5]}]
set_property PACKAGE_PIN B18 [get_ports {HB_dq_0[6]}]
set_property PACKAGE_PIN A16 [get_ports {HB_dq_0[7]}]


set_property PACKAGE_PIN E18 [get_ports HB_RWDS_0]

set_property PACKAGE_PIN D17 [get_ports HB_CS1n_0]
set_property PACKAGE_PIN J17 [get_ports HB_RSTn_0]

#set_property PACKAGE_PIN A18 [get_ports HB_CS0n_0 ]
#set_property PACKAGE_PIN J18 [get_ports HB_INTn_0 ]
#set_property PACKAGE_PIN C17 [get_ports HB_RSTOn_0]


#
# FPGA Pin Voltage assignment 
#
set_property IOSTANDARD LVCMOS18 [get_ports HB_CLK0_0]
set_property IOSTANDARD LVCMOS18 [get_ports HB_CLK0n_0]
set_property IOSTANDARD LVCMOS18 [get_ports {HB_dq_0[*]}]
set_property IOSTANDARD LVCMOS18 [get_ports HB_CS1n_0]
set_property IOSTANDARD LVCMOS18 [get_ports HB_RSTn_0]
set_property IOSTANDARD LVCMOS18 [get_ports HB_RWDS_0]

set_property SLEW       FAST     [get_ports {HB_*}]
set_property DRIVE      16       [get_ports {HB_*}]

#set_property IOSTANDARD LVCMOS18 [get_ports HB_CS0n_0]
#set_property IOSTANDARD LVCMOS18 [get_ports HB_INTn_0]
#set_property IOSTANDARD LVCMOS18 [get_ports HB_RSTOn_0]

#set_property PULLUP true [get_ports HB_RSTOn_0]
#set_property PULLUP true [get_ports HB_INTn_0]

set_property PULLUP     TRUE     [get_ports {HB_CS1n_0}]
set_property PULLDOWN   TRUE     [get_ports {HB_RSTn_0}]

#
#Hyperbus Clock - change according to clk pin on PLL
#
create_generated_clock -name clk_0   -source [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKIN1] -master_clock sys_clock [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKOUT0]
create_generated_clock -name clk_90  -source [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKIN1] -master_clock sys_clock [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKOUT1]
create_generated_clock -name clk_180 -source [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKIN1] -master_clock sys_clock [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKOUT2]

#
#100Mhz clock freqeuncy - change accordingly
#
set hbus_freq_ns   10

set dqs_in_min_dly -1
set dqs_in_max_dly  1

set HB_dq_ports    [get_ports HB_dq_0[*]]

#
#Create RDS clock and RDS virtual clock
#
create_clock -period $hbus_freq_ns -name rwds_clk      [get_ports HB_RWDS_0]
create_clock -period $hbus_freq_ns -name virt_rwds_clk 

#
#Input Delay Constraint -  HB_RWDS-HB_DQ 
#
set_input_delay -clock [get_clocks virt_rwds_clk]             -max ${dqs_in_max_dly} ${HB_dq_ports}
set_input_delay -clock [get_clocks virt_rwds_clk] -clock_fall -max ${dqs_in_max_dly} ${HB_dq_ports} -add_delay

set_input_delay -clock [get_clocks virt_rwds_clk]             -min ${dqs_in_min_dly} ${HB_dq_ports} -add_delay
set_input_delay -clock [get_clocks virt_rwds_clk] -clock_fall -min ${dqs_in_min_dly} ${HB_dq_ports} -add_delay

set_multicycle_path -setup -end -rise_from [get_clocks virt_rwds_clk] -rise_to [get_clocks rwds_clk] 0
set_multicycle_path -setup -end -fall_from [get_clocks virt_rwds_clk] -fall_to [get_clocks rwds_clk] 0

set_false_path  -fall_from [get_clocks virt_rwds_clk] -rise_to [get_clocks rwds_clk] -setup
set_false_path  -rise_from [get_clocks virt_rwds_clk] -fall_to [get_clocks rwds_clk] -setup
set_false_path  -fall_from [get_clocks virt_rwds_clk] -fall_to [get_clocks rwds_clk] -hold
set_false_path  -rise_from [get_clocks virt_rwds_clk] -rise_to [get_clocks rwds_clk] -hold

#set_false_path -from [get_clocks clk_0] -to [get_clocks rwds_clk]
#set_false_path -from [get_clocks rwds_clk] -to [get_clocks clk_0]

#
#Output Delay Constraint -  HB_CLK0-HB_DQ 
#

create_generated_clock -name HB_CLK0_0 -source [get_pins */*/*/U_IO/U_CLK0/dq_idx_[0].ODDR_inst/C] -multiply_by 1 -invert [get_ports HB_CLK0_0]

set_output_delay -clock [get_clocks HB_CLK0_0] -min -1.000 ${HB_dq_ports}
set_output_delay -clock [get_clocks HB_CLK0_0] -max  1.000 ${HB_dq_ports}
set_output_delay -clock [get_clocks HB_CLK0_0] -min -1.000 ${HB_dq_ports} -clock_fall -add_delay
set_output_delay -clock [get_clocks HB_CLK0_0] -max  1.000 ${HB_dq_ports} -clock_fall -add_delay


set_false_path -from [get_pins */*/*/U_HBC/*/dq_io_tri_reg/C] -to ${HB_dq_ports}

#set_false_path -from * -to [get_pins */*/inst/*/i_iavs0_270_rstn_1_reg/CLR]
#set_false_path -from * -to [get_pins */*/inst/*/i_iavs0_270_rstn_2_reg/CLR]
#set_false_path -from * -to [get_pins */*/inst/*/i_iavs0_270_rstn_3_reg/CLR]


set_false_path -from [get_clocks rwds_clk] -to [get_clocks -of_objects [get_pins msys_i/clk_wiz_1/inst/mmcm_adv_inst/CLKOUT0]]
set_false_path -from [get_clocks virt_rwds_clk] -to [get_clocks rwds_clk]

Software Design - Vitis

For SDK project creation, follow instructions from:

Vitis

Application

Template location: "<project folder>\sw_lib\sw_apps\"

hello_te0725

Trenz Hello TE0725 example as endless loop. Output on console.

Additionally running a Low Level EEPROM IIC example.

Template location: \sw_lib\sw_apps\hello_te0725The printed Text can be modified.hello_te0725

The printed Text can be modified.

spi_bootloader

TE modified SPI Bootloader from Henrik Brix Andersen.

Bootloader to load app or second bootloader from flash into DDR.

Here it loads the hello_te0725.elf from QSPI-Flash to RAM.

Descriptions:

• Modified Files: bootloader.c
• Changes:
  
  • Change the SPI defines in the header
  • Add some reiteration in the frist spi read call

Additional Software

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Legal Notices