Page History

Custom_table_size_100

Page properties

hidden	true
id	Comments

Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM"

Template Change history:

Version	Changes	Author
4.1	Minor changes Notes Tables	ED
4.0	Rework for smaller TRM which can be generated faster Reduce Signal Interfaces Pin Reduce On Board Perihery Reduce Power Move Configuration Signals from Overview to own section	JH
3.12	Version History changed from list to table all changed title-alignment for tables from left to center	ma
3.11	update "Recommended Operating Conditions" section
3.1	New general notes for temperature range to "Recommended Operating Conditions"
3.02	add again fix table of content with workaround to use it for pdf and wiki Export Link for key features examples Notes for different Types (with and without Main FPGA) Export Link for Signals, Interfaces and Pins examples Notes for different Types (Modul, Modul Hypride, Evalboard, Carrier)
3.01	remove fix table of content and page layout ( split page layout make trouble with pdf export) changed and add note to signal and interfaces, to on board periphery section ...(not finished)
3.00	→ separation of Carrier/Module and evaluation kit TRM
2.15	add excerpt macro to key features
2.14	add fix table of content add table size as macro

Page properties

hidden	true
id	Comments

Important General Note:

If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template:

Scroll Title

anchor	Figure_anchorname
title-alignment	center
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables

Scroll Title

anchor	Table_tablename
title-alignment	center
title	Text

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Example	Comment
1	2

The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
  - type: Figure, Table
  - main section:
    - "OV" for Overview
    - "SIP" for Signal Interfaces and Pins,
    - "OBP" for On board Peripherals,
    - "PWR" for Power and Power-On Sequence,
    - "B2B" for Board to Board Connector,
    - "TS" for Technical Specification
    - "VCP" for Variants Currently in Production
    - "RH" for Revision History
  - name: custom, some fix names, see below
- Fix names:
  - "Figure_OV_BD" for Block Diagram
  - "Figure_OV_MC" for Main Components
  - "Table_OV_IDS" for Initial Delivery State
  - "Table_PWR_PC" for Power Consumption
  - "Figure_PWR_PD" for Power Distribution
  - "Figure_PWR_PS" for Power Sequence
  - "Figure_PWR_PM" for Power Monitoring
  - "Table_PWR_PR" for Power Rails
  - "Table_PWR_BV" for Bank Voltages
  - "Table_TS_AMR" for Absolute_Maximum_Ratings
  - "Table_TS_ROC" for Recommended_Operating_Conditions
  - "Figure_TS_PD" for Physical_Dimensions
  - "Table_VCP_SO" for TE_Shop_Overview
  - "Table_RH_HRH" for Hardware_Revision_History
  - "Figure_RH_HRN" for Hardware_Revision_Number
  - "Table_RH_DCH" for Document_Change_History
Use Anchor in the document: add link macro and add "#<anchorname>
Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>

Page properties

hidden	true
id	Comments

-----------------------------------------------------------------------

Page properties

hidden	true
id	Comments

Note for Download Link of the Scroll ignore macro:

Link to the base folder of the module (remove de/ or en/ from the URL):
Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Scroll Ignore
Download PDF version of this document.

Overview

The Trenz Electronic TE0818 is an industrial grade MPSoC SOM integrating a Xilinx Zynq UltraScale+ MPSoC, DDR4 SDRAM with 64-Bit width data bus connection, SPI Boot Flash memory for configuration and operation, transceivers and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking connections in a compact 5.2 cm x 7.6 cm form factor.

Refer to http://trenz.org/te0818-info for the current online version of this manual and other available documentation.

Page properties

hidden	true
id	Comments

Notes :

short description of the PCB
Short Link of the wiki resources reference:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Key Features

Page properties

hidden	true
id	Comments

Note:
'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

→ See examples fro different types <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

Excerpt

SoC
- Device: ZU6 / ZU9 / ZU15 ¹⁾
- Engine: CG / EG ¹⁾
- Speedgrade: -1 / -2 ¹⁾
- Temperature Range: Extended / Industrial ¹⁾
- Package: FFVC900
RAM/Storage
- 4 GByte DDR4 SDRAM ²⁾
- 2 x 64 MByte Serial Flash ³⁾
- EEPROM with MAC address
On Board
- Oscillator
Interface
- 4 x B2B Connector (ADM6)
  - up to 204 PL IO
    - HP: 156
    - HD: 48
  - up to 65 PS MIO
  - 4 GTR
  - 16 GTH
  - I2C, JTAG, CONFIG
Power
- 3.3 V power supply via B2B Connector needed ⁴⁾.
Dimension
- 76 mm x 52 mm
Notes
¹⁾ Please, take care of the possible assembly options. Furthermore, check whether the power supply is powerful enough for your FPGA design.
²⁾ Up to 32 GByte are possible with a maximum bandwidth of 2400 MBit/s.
³⁾ Please, take care of the possible assembly options.
⁴⁾ Dependant on the assembly option a higher input voltage may be possible

Page properties

hidden	true
id	Comments

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

Note

Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name.

Example: TE0812 Block Diagram

Note

All created DrawIOs should be named according to the Module name:

Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD

Scroll Title

anchor	Figure_OV_BD
title-alignment	center
title	TExxxx block diagram

Scroll Ignore

draw.io Diagram

border	true

diagramName	TE0818_OV_BD
simpleViewer	false
width
links	auto
tbstyle	top
lbox	true
diagramWidth	641
revision	3

Scroll Only

Main Components

Page properties

hidden	true
id	Comments

Notes :

Picture of the PCB (top and bottom side) with labels of important components
Add List below

Note
For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_OV_MC
title-alignment	center
title	TExxxx main components

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...
...
...

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

draw.io Diagram

border	true

diagramName	Figure_OV_MC
simpleViewer	false
width
links	auto
tbstyle	top
lbox	true
diagramWidth	752
revision	3

Scroll Only
Image Added

SoC, U1
DDR4, U2, U3, U9, U12
Quad SPI Flash, U7, U17
Connector, J1, J2, J3, J4
EEPROM, U4
Clock Generator, U5
Oscillator, U25, U32

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

Scroll Title

anchor	Table_OV_IDS
title-alignment	center
title	Initial delivery state of programmable devices on the module

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Storage device name	Content	Notes
DDR4 SDRAM	not programmed
Quad SPI Flash	not programmed
EEPROM	not programmed besides factory programmed MAC address
Programmable Clock Generator	not programmed

Signals, Interfaces and Pins

Scroll Title

anchor	Table_OV_IDS
title-alignment	center
title	Initial delivery state of programmable devices on the module

Scroll Table LayoutorientationportraitsortDirectionASCrepeatTableHeadersdefaultstylewidthssortByColumn1sortEnabledfalsecellHighlightingtrue

Storage device name

Content

Notes

Quad SPI Flash

EEPROMSystem Controller CPLDDDR4 SDRAMeMMCProgrammable Clock Generator

Signals, Interfaces and Pins

Page properties

hidden	true
id	Comments

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designtor List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

Connectors

Scroll Title

anchor	Table_SIP_C
title-alignment	center
title	Board Connectors

Scroll Table LayoutorientationportraitsortDirectionASCrepeatTableHeadersdefaultstylewidthssortByColumn1sortEnabledfalsecellHighlightingtrueConnector TypeDesignatorInterfaceIO CNTNotes

Test Points

you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.

Example:

¹⁾ Direction:

- IN (C2M): Carrier to Module, means it's an input from the point of view of this board
- OUT (M2C): Module to Carrier, means it's output from the point of view of this board

Page properties

hidden	true
id	Comments

Test Point

Signal

Notes¹⁾

TP1

PWR_PL_OK

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designtor List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

Connectors

Notes

Scroll Title

anchor	Table_SIP_TPsC
title-alignment	center
title	Test Points InformationBoard Connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Test Point

Signal

Connector Type	Designator	Interface	IO CNT

¹⁾

TP1

¹⁾ Direction:

- IN (C2M): Carrier to Module, means it's an input from the point of view of this board
- OUT (M2C): Module to Carrier, means it's output from the point of view of this board

On-board Peripherals

Notes
B2B	JM1	MGT PL	12 x MGT (RX/TX)
B2B	JM1	HP	52 SE / 24 DIFF
B2B	JM2	MGT PS	2 x MGT CLK
B2B	JM2	CLK	DIFF CLK
B2B	JM2	MGT PL	4 x MGT (RX/TX)
B2B	JM2	MGT PS	4 x MGT (RX/TX)
B2B	JM2	CFG	JTAG
B2B	JM2	CFG	MODE
B2B	JM3	HD	48 SE / 24 DIFF
B2B	JM3	MGT PL	3 x MGT CLK
B2B	JM3	CLK	DIFF CLK
B2B	JM3	MIO	65 GPIO
B2B	JM4	HP	104 SE / 48 DIFF

¹⁾ IO CNT depends on assembly variant. E.g. the MGTs are not available for all FPGAs

Test Points

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

Page properties

hidden	true
id	Comments

Chip/Interface

Designator

Connected To

Notes

ETH PHY

U10

B2B connector J1
SoC MIO

Gigabit ETH PHY

Scroll Title

anchor	Table_OBP
title-alignment	center
title	On board peripherals

Scroll Table Layout

orientation

portrait

sortDirection

ASC

repeatTableHeaders

default

style

widths

sortByColumn

1

sortEnabled

false

cellHighlighting

true

Chip/Interface

Designator

Connected To

Notes

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Configuration and System Control Signals

you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.

Example:

Test Point	Signal	Notes¹⁾
TP1	PWR_PL_OK

¹⁾ Direction:

- IN (C2M): Carrier to Module, means it's an input from the point of view of this board
- OUT (M2C): Module to Carrier, means it's output from the point of view of this board

Page properties

hidden	true
id	Comments

Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...

In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)

¹⁾ Direction:

- IN (C2M): Carrier to Module, means it's an input from the point of view of this board
- OUT (M2C): Module to Carrier, means it's output from the point of view of this board

Scroll Title

anchor	Table_OVSIP_CNTRLTPs
title-alignment	center
title	Controller signal.Test Points Information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector+Pin

Test Point	Signal

Name

Direction

Notes¹⁾

Description

Power and Power-On Sequence

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Rails

TP1	PLL_SCL	pulled-up to PS_1V8
TP2	PLL_SDA	pulled-up to PS_1V8
TP3	LP_DCDC
TP4	DCDCIN
TP5	GND
TP6	TCK
TP7	PL_DCIN
TP8	GND
TP9	GT_DCDC
TP10	GND
TP11	TDI
TP12	TDO
TP13	TMS
TP14	PS_1V8
TP15	No Net Name	REF3312AIDCKT (U33) ouput voltage
TP16	FP_0V85
TP17	DDR_2V5
TP18	DDR_PLL
TP19	PL_VCCINT
TP20	AUX_R
TP21	AVTT_R
TP22	AUX_L
TP24	AVCC_R
TP26	AVTT_L
TP28	AVCC_L
TP30	PS_PLL
TP31	PS_AVTT
TP32	LP_0V85
TP33	PS_AUX
TP34	PS_AVCC
TP36	POR_B

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

On-board Peripherals

Page properties

hidden	true
id	Comments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

Chip/Interface	Designator	Connected To	Notes
ETH PHY	U10	B2B connector J1 SoC MIO	Gigabit ETH PHY

Scroll Title

anchor	Table_OBP
title-alignment	center
title	On board peripherals

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Chip/Interface	Designator	Connected To	Notes
DDR4 SDRAM	U2, U3, U9, U12	SoC - PS
Quad SPI Flash	U7, U17	SoC - PS	Booting.
EEPROM	U4	B2B - J2
Clock Generator	U5	SoC, B2B
Oscillator	U25	Clock Generator	25 MHz
Oscillator	U32	SoC	33.333333 MHz

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Configuration and System Control Signals

Page properties

hidden	true
id	Comments

Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)

Scroll Title

anchor	Table_OV_CNTRL
title-alignment	center
title	Controller signal.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector+Pin	Signal Name	Direction¹⁾	Description
JM1.A45	POR_OVERRIDE	IN	Override power-on reset delay ²⁾.
JM2.A30	PG_PLL_1V8	OUT	SI_PLL_1V8 power rail powered-up.
JM2.A31	ERR_OUT	OUT	PS error indication ²⁾.
JM2.A34	ERR_STATUS	OUT	PS error status ²⁾.
JM2.A35	LP_GOOD	OUT	Low-power domain powered-up. Pulled up to 3.3VIN.
JM2.A36	PLL_SCL	IN	I2C clock. Pulled up to PS_1V8.
JM2.A37	PLL_SDA	IN/OUT	I2C data. Pulled up to PS_1V8.
JM2.A40	PG_GT_L	OUT	Left GTH Transceivers powered-up.
JM2.A41	EN_PSGT	IN	Enable GTR transceiver power-up.
JM2.A44 / JM2.A45 / JM2.A46 / JM2.A47	TCK / TDI / TDO / TMS	Signal-dependent	JTAG configuration and debugging interface. JTAG reference voltage: PS_1V8
JM2.B29	PG_PSGT	OUT	GTR transceivers powered-up.
JM2.B30	PROG_B	IN/OUT	Power-on reset ²⁾. Pulled-up to PS_1V8.
JM2.B33	SRST_B	IN	System reset ²⁾. Pulled-up to PS_1V8.
JM2.B34	INIT_B	IN/OUT	Initialization completion indicator after POR ²⁾. Pulled-up to PS_1V8.
JM2.B37	PG_PL	OUT	Programmable logic powered-up.
JM2.B38	EN_FPD	IN	Enable full-power domain power-up.
JM2.B41	PG_FPD	OUT	Full-power domain powered-up.
JM2.B42	EN_LPD	IN	Enable low-power domain power-up.
JM2.B45	PG_DDR	OUT	DDR power supply powered-up.
JM2.B46	DONE	OUT	PS done signal ²⁾. Pulled-up to PS_1V8.
JM2.B47	EN_DDR	IN	Enable DDR power-up.
JM2.C30	EN_GT_L	IN	Enable left GTH transceiver power-up.
JM2.C31	MR	IN	Manual reset.
JM2.C32	PLL_SEL0	IN	PLL clock selection.
JM2.C33	PLL_RST	IN	PLL reset. Pulled-up to PS_1V8.
JM2.C35	EN_PL	IN	Enable programable logic power-up.
JM2.C36	EN_GT_R	IN	Enable right GTH transceiver power-up.
JM2.C37	PLL_FDEC	IN	PLL Frequency decrementation.
JM2.C44 / JM2.C45 / JM2.C46 / JM2.C47	MODE3..0	IN	Boot mode selection ²⁾: JTAG QUAD-SPI (32 Bit) SD1 (2.0) eMMC (1.8 V) SD1 LS (3.0) Supported Modes depends also on used Carrier.
JM2.D29	EN_PLL_PWR	IN	Enable PLL power supply.
JM2.D30	PLL_FINC	IN	PLL Frequency incrementation.
JM2.D31	PLL_LOLn	OUT	Loss of lock status.
JM2.D32	PLL_SEL1	IN	PLL clock selection.
JM2.D33	PG_GT_R	OUT	Right GTH Transceivers powered-up.
JM2.D37	PSBATT	IN	PS RTC Battery supply voltage ^{2) 3)}.
JM2.D38	PUDC_B	IN	Configuration pull-ups setting ²⁾. Pulled-up to PL_1V8.
JM2.D45 / JM2.D46	DX_P / DX_N	-	SoC temperatur sensing diode pins ²⁾.

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

²⁾ See UG1085 for additional information.

Power and Power-On Sequence

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Rails

Page properties

hidden	true
id	Comments

List of all Powerrails which are accessible by the customer

Main Power Rails and Variable Bank Power

List of all Powerrails which are accessible by the customer

Main Power Rails and Variable Bank Power

¹⁾ Direction:

- IN (C2M): Carrier to Module, means it's an input from the point of view of this board.
- OUT (M2C): Module to Carrier, means it's output : Output from the point of view of this board.

Scroll Title

anchor	Table_PWR_PR
title-alignment	center
title	Module power rails.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Connector + Pin	Direction¹⁾
VCCO_66	JM1.A32 / JM1.A33	IN
VREF_66	JM1.A41	IN
3.3VIN	JM1.A54 / JM1.A55 / JM1.B55 / JM1.B56	IN
PL_1V8	JM1.C32 / JM1.C33 / JM1.D33 / JM1.D34	OUT
PL_DCIN	JM1.C56 / JM1.C57 / JM1.C58 / JM1.C59 / JM1.C60 / JM1.D56 / JM1.D57 / JM1.D58 / JM1.D59 / JM1.D60	IN
LP_DCDC	JM2.A50 / JM2.A51 / JM2.A52 / JM2.B50 / JM2.B51 / JM2.B52 / JM2.C50 / JM2.C51 / JM2.C52 / JM2.D50 / JM2.D51 / JM2.D52	IN
DCDCIN	JM2.A57 / JM2.A58 / JM2.A59 / JM2.A60 / JM2.B57 / JM2.B58 / JM2.B59 / JM2.B60 / JM2.C57 / JM2.C58 / JM2.C59 / JM2.C60 / JM2.D57 / JM2.D58 / JM2.D59 / JM2.D60 /	IN
PS_BATT	JM2.D37	IN
DDR_1V2	JM2.D47	OUT
PS_1V8	JM2.C34 / JM2.D34 / JM3.A56 / JM3.B56 / JM3.C56 / JM3.D56	OUT
PLL_3V3	JM3.A55	IN
GT_DCDC	JM3.A59 / JM3.A60 / JM3.B59 / JM3.B60 / JM3.C59 / JM3.C60 / JM3.D59 / JM3.D60 /	IN
VCCO_48	JM3.C7 / JM3.C8 / JM3.D8 / JM3.D9	IN
VCCO_47	JM3.C19 / JM3.C20 / JM3.D20 / JM3.D21	IN
VCCO_64	JM4.B21 / JM4.B39	IN
VREF_64	JM4.B30	IN
VCCO_65	JM4.C21 / JM4.C39	IN
VREF_65	JM4.C30	IN

¹⁾ Direction:

- IN: Input

Page properties

hidden	true
id	Comments

Scroll Title

anchor	Table_PWR_PR
title-alignment	center
title	Module power rails.

Scroll Table Layout

orientation

portrait

sortDirection

ASC

repeatTableHeaders

default

style

widths

sortByColumn

1

sortEnabled

false

cellHighlighting

true

Power Rail Name/ Schematic Name

Connector + Pin

Direction¹⁾

Notes

Recommended Power up Sequencing

Page properties

hidden	true
id	Comments

List baseboard design hints for final baseboard development.

Scroll Title

anchor	Table_BB_DH
title-alignment	center
title	Baseboard Design Hints

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Sequence	Net name	Recommended Voltage Range	Pull-up/down	Description	Notes

Board to Board Connectors

Page properties

hidden	true
id	Comments

This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series,
For example: 6 x 6 SoM LSHM B2B Connectors
Include Page
PD:6 x 6 SoM LSHM B2B Connectors
PD:6 x 6 SoM LSHM B2B Connectors

Technical Specifications

Page properties

hidden	true
id	Comments

List of all Powerrails which are accessible by the customer

Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

Absolute Maximum Ratings ^*)

Scroll Title

anchor	Table_TS_AMR
title-alignment	center
title	PS absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Description	Min	Max	Unit
				V
				V
				V
				V
				V
				V
				V
				V
				°C

^*) Stresses beyond those listed under TE0818 TRM (more or less equal to TE0808 but other connectors) may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these
or any other conditions beyond those indicated under TE0818 TRM (more or less equal to TE0808 but other connectors). Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Variants of modules are described here: Article Number Information
Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.

Scroll Title

anchor	Table_TS_ROC
title-alignment	center
title	Recommended operating conditions.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Parameter	Min	Max	Units	Reference Document
			V	See ???? datasheets.
			V	See ???? datasheet.
			V	See ???? datasheet.
			V	See ???? datasheet.
			V	See ???? datasheet.
			V	See ???? datasheet.
			V	See ???? datasheet.
			°C	See ???? datasheet.

Physical Dimensions

Module size: ?? mm × ?? mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

Page properties

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_TS_PD
title-alignment	center
title	Physical Dimension

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Currently Offered Variants

Page properties

hidden	true
id	Comments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0706:

ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Scroll Title

anchor	Table_VCP_SO
title-alignment	center
title	Trenz Electronic Shop Overview

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Trenz shop TEXXXX overview page
English page	German page

Revision History

Hardware Revision History

Page properties

hidden	true
id	Comments

Set correct links to download Carrier, e.g. TE0706 REV02:

TE0706-02 -> https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

Date format: YYYY-MM-DD
Example:
Date Revision Changes Documentation Link
2020-11-25 REV02
Resistors R14 and R15 was replaced by 953R (was 5K1)
Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02

Scroll Title

anchor	Figure_RV_HRN
title-alignment	center
title	Board hardware revision number.

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Scroll Title

anchor	Table_RH_HRH
title-alignment	center
title	Hardware Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision	Changes	Documentation Link

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Scroll Title

anchor	Table_RH_DCH
title-alignment	center
title	Document change history.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date

Revision

Contributor

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat
showVersions	false

Page info

infoType	Modified by
type	Flat
showVersions	false

<add TRM change list here>

--

all

Page info

infoType	Modified users
type	Flat
showVersions	false

--

Disclaimer

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 3

New Version 4

Key

Overview

Key Features

Main Components

Initial Delivery State

Initial Delivery State

Signals, Interfaces and Pins

Signals, Interfaces and Pins

Connectors

Test Points

Connectors

On-board Peripherals

Test Points

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

On-board Peripherals

DDR4 SDRAM

Quad SPI Flash

EEPROM

Clock Generator

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings *)

Recommended Operating Conditions

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Absolute Maximum Ratings ^*)