Page History
...
Scroll Only (inline) |
---|
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/TE0701 |
The Trenz Electronic TE0701 Carrier Board is a base-board for 4x5 SoMs, which exposes the MIO- and the PS/PL-pins of the SoM to accessible connectors and provides a whole range of on-board-componentes to test and evaluate Trenz Electronic 4x5 SoMs.
...
The TE0701 has on-board USB 2.0 High Speed to UART/FIFO IC FT2232HQ from FTDI. Channel A can be used as JTAG-Interface (MPSSE) to program the System-Controller-CPLD, Channel B can be used as UART-Interface routed to CPLD. There also 4 additionally bus-lanes available for user-specific use. The FT2232HQ-Chip can also be used as FIFO -Bufferin FT245 asynchronous mode.
There is also a standard 256 Byte EEPROM connected to the FT2232HQ-chip available to store custom configuration settings. EEPROM settings can be changed using FTDI provided tools that can be downloaded from FTDI website. See FTDI website for more information.
...
date | revision | authors | description |
---|---|---|---|
2016-11-29 | Ali Naseri | TRM update due to new revision 06 of the carrier board. | |
2016-11-28 | 1.0V4 | Ali Naseri | TRM adjustment to the newest revision (05) of TE0701 Carrier Board. |
2014-02-18 | 0.2
| Sven-Ole Voigt | TE0701-03 (REV3) updated |
2014-01-05 | 0.1 | Sven-Ole Voigt | Initial release |
All |
...
Date | Revision | Notes | PCN | Documentation link | ||||||
---|---|---|---|---|---|---|---|---|---|---|
- | 06 | additional Jumper J16 and switch S4 for setting VCCIO FMC_VADJ. | PCN-20161128 | |||||||
- | 0105 | Prototypeimproved manufacturing | TRM-TE0701-05 | |||||||
- | 0204 | Prototype|||||||||
- | 03 | changed DC/DC converters | ||||||||
- | 0402 | Prototype | ||||||||
- | 05 | improved manufacturing | TRM-TE0701-05 | - | 06 | 01 | Prototype |
Figure 4: Hardware revision Number
...