An EDDP Kit.
A network cable.
A wired LAN.
A computer capable of running a web browser, that is connected to the LAN.
Micro-USB cable
Serial terminal program; for example Putty available at https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html or TeraTerm available at https://ttssh2.osdn.jp/index.html.en.

2. Assemble the demo setup

...

3. Steps to start motor in the demo setup

Copy files from SDSoC/SD_Card/arty_z7_10 to the SD card
Modify init.sh and focserver.conf to suit your needs.
Power up the Arty Z7 10 board and note the IP address (either DHCP logs or serial console). If there are no DHCP server answering, default of 192.168.42.123 will be used after 10 second timeout.
Point a web browser to the IP address of the board. A FOC control panel appears.
Click button "Motor" to start the motor. The button will change color.
To enable live charts, enable checkbox "Live", which is under the charts.