Page History
...
Power and Power-On Sequence
To power-up a module, 5.0V power supply with minimum current capability of 1A is recommended.
...
Power Consumption
TE0726 needs one single power source via micro-USB jack Micro USB2.0 B socket J1. However, it is recommended to not use any USB equipment below USB standard 2.0 to power the module. Also two-pin header J5 can be used to provide power source if needed.
...
as alternative to feed the 5V power supply voltage.
The maximum power consumption of a module mainly depends on the design which is running on the FPGA.
Xilinx provide a power estimator excel sheets to calculate power consumption. It's also possible to evaluate the power consumption of the developed design with Vivado. See also Trenz Electronic Wiki FAQ.
To power-up a module, 5.0V power supply with minimum current capability of 1A is recommended.
Power Distribution Dependencies
There is no specific power-on sequence, except to achieve minimum current draw, I/Os should be 3-stated at power-on.
There are following dependencies how the power supply voltage (5V nominal) is distributed to the on-board DC-DC converters.
Power Rails and Bank Voltages
...
Date | Revision | Contributors | Description |
---|---|---|---|
2017-11-10 | Ali Naseri | Updated section Power section, added Power-Distribution diagram. | |
2017-05-30 | V3 | Jan Kumann | Absolute maximum ratings. Layout redesign. Wiki link fixed. SoC model removed from BD. |
2017-05-24 | V2 | John Hartfiel | Weight. |
2017-05-24 | V1 | Jan Kumann | Initial version. |
...