Page History

This Trenz Electronic Starter Kit  Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure.   See Shop Link shop link for detailed content.

Wiki Links

...

Kit specific

• TEBF0808 Getting Started - Summarised documentation of Connectors, DIPs, LEDs
• TE081x and TE080x Starterkit montage instruction - Assembly instructions if you want to assemble it yourself

Module and Carrier separately

• TE0808 - UltraSoM+ - Wiki with TRM, reference projects, application notes and more
  • TE0808 Resources - Links to all TE0808 Resources
• TEBF0808 - Wiki with TRM, application notes and more
  • TEBF0808 Resources - Links to all TEBF0808 Resources
• TE0790 - XMOD

...

• - Wiki with

...

• TRM, application notes and more
  • TE0790 Resources - Links to all TE0790 Resources
• AMD Development Tools - Short instructions for Vivado, SDK, SDSoC
• Project Delivery - AMD devices - General descriptions of reference designs and content

Download Links

• TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
• TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
• TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
• TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

Shop Links

• Shop TE0808-Starter-Kit -

...

•  contains prices, available stock, disposability, scope of delivery and more

AMD

...

Software and Driver

• Vivado Design Suite -

...

• AMD Design Software with JTAG drivers and documentation

...

• AMD Download Area

...

• - All

...

• AMD Software, Device Models and Libraries

...

Getting Started

1. Connect cold-device plug with power supply and set power switch to on.

2. Connect JTAG-USB cable with host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture)
3. Insert SD-Card with predefined example into SD-Card slot.
4. open Serial Console:
   1. COM Port: for correct number see device manager
   2. Speed:115200
5. Press Core V1 Mini-ITX case power on button.
6. Press Core V1 Mini-ITX reset button  to start boot process
7. Linux login:
   
   1. User Name:root
   2. Password:root

Important Notes

For ES1 only:

activate beta device see: FAQ - How can I activate beta devices?

Support

• For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de