Versions Compared

Old Version 23

changes.mady.by.user John Hartfiel

Saved on

compared with

New Version Current

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

HTML
<!--
Template Revision 1.6
 -->



Scroll Only (inline)
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/SC-CPLD-Firmware



Scroll pdf ignore

Table of contents

Table of Contents
outlinetrue

...

Feature Summary

  • FMC VADJ Power
  • JTAG / FMC JTAG / PJTAG
  • RESET/Enable Management
  • LED
  • RGPIO
  • SD
  • CAN
  • USB
  • DisplayPort

Firmware Revision and supported PCB Revision

...

Schematic /Souce Code NameDirectionPinDescriptionPCB REV2 Exception
C_T1 24/ currently_not_usedNC
C_T2 26/ currently_not_usedNC
C_T3 25/ currently_not_usedNC
C_TCK          in131JTAG J28 (XMOD2) / FMC JTAGinternal currently_not_used
 
C_TDI          in136JTAG J28 (XMOD2) / internal currently_not_usedFMC JTAG 
C_TDO1       TDO       out137JTAG J28 (XMOD2) / internal currently_not_usedFMC JTAG 
C_TMS         in130JTAG J28 (XMOD2) / internal currently_not_usedFMC JTAG 
CAN_FAULT    in106CAN / currently_not_used  
CAN_RX       in107CAN / currently_not_used 
CAN_S        out105CAN / currently_not_used 
CAN_TX       out104CAN / currently_not_used 
CLK_125MHZ / PHY_CLKin70/ currently_not_used 
CON_NTRST     117/ currently_not_used 
CON_RTCK / JTAG_RTCK    out125JTAG, Connector J30 
CON_SRST / JTAG_SRSTin127JTAG, Connector J30 
CON_TCK / JTAG_TCKin122JTAG, Connector J30 / PJTAG0 
CON_TDI / JTAG_TDIin119JTAG, Connector J30 / PJTAG0 
CON_TDO / JTAG_TDOout126JTAG, Connector J30 / PJTAG0 
CON_TMS / JTAG_TMSin121JTAG, Connector J30 / PJTAG0 
DIR_T1 23/ currently_not_usedNC
DIR_T2 28/ currently_not_usedNC
DIR_T3 27/ currently_not_usedNC
DP_AUX_DE   / DP_DE out92Display Port 
DP_AUX_RX   / DP_RXin91Display Port 
DP_AUX_TX    / DP_TXout93Display Port 
DP_EN        out77Display Port 
DP_TX_HPD  /DP_HDP in94Display Port 
ETH_RST      out62Ethernet 
EX_IO1        112PMOD / currently_not_used 
EX_IO2        113PMOD / currently_not_used 
EX_IO3        114PMOD / currently_not_used 
EX_IO4        115PMOD / currently_not_used 
F2_EN         19FAN J35 / currently_not_usedNC
F2PWM         20FAN J35 / currently_not_usedNC
F2SENSE       21FAN J35 / currently_not_usedNC
FMC_CLK_DIR  in73FMC 
FMC_TCK      out95FMC / currently_not_used 
FMC_TDI      out96FMC / currently_not_used 
FMC_TDO      in97FMC / currently_not_used, connected to RGPIO 
FMC_TMS      out98FMC / currently_not_used  
FMC_VID0     out139FMC VADJ Power Selection 
FMC_VID1     out140FMC VADJ Power Selection 
FMC_VID2     out141FMC VADJ Power Selection 
GND 84REV03 unconnected / currently_not_usedUSB_TRST, other USB HUB
HDIO_SC10 / SC10 inout60FPGA / DP_RX or 'Z' 
HDIO_SC11 / SC11  in59FPGA / DP_DE 
HDIO_SC12 / SC12out58FPGA / DP_HPD 
HDIO_SC13 / SC13out57FPGA / RGPIO TX 
HDIO_SC14 / SC14  in56FPGA / RGPIO RX 
HDIO_SC15 / SC15in55FPGA / RGPIO CLK 
HDIO_SC16    SC16 / SC16   in 54FPGA /  currently_not_usedCAN_S 
HDIO_SC17 / SC17in52FPGA / XMOD LED  
HDIO_SC18 / SC18in68FPGA /currently CAN_not_usedTX 
HDIO_SC19 / SC19inout69FPGA /  currently_not_used CAN_RX 
I2C_RST      out61I2C 
JTAGENB       120external Pin for CPLD Firmware Update  
LED_1A / JLED1out109USB3.0 LED Jellow 
LED_2A / JLED2Aout111USB3.0 LED Green/Orange 
LED_2B / JLED2Bout110USB3.0 LED Green/Orange 
MIO26        in41MIO / currently_not_usedPJTAG 
MIO27        in40MIO / currently_not_usedPJTAG 
MIO28        in39MIO / currently_not_usedMIO  / PJTAG 
MIO29        in38MIO / currently_not_usedMIO  / PJTAG 
OCLK_EN  / OSC_EN   out74Programmable Oscillator U45 
PHY_CONFIG   out65ETH PHY 
PHY_LED0     in67ETH PHY 
PHY_LED1     in86ETH PHY 
PHY_LED2     in85ETH PHY 
SC_CLK0 / CLK0    in76/ currently_not_usedSC_CLK_P
SC_CLK1 / CLK1    in75/ currently_not_usedSC_CLK_N
SC_IO0 / X0in50Master-Slave SC-Communication / Power Reset 
SC_IO1 / X1      in49Master-Slave SC-Communication / Power Reset 
SC_IO2 / X2in48Master-Slave SC-Communication / currently_not_used  
SC_IO3 / X3in47Master-Slave SC-Communication / currently_not_used 
SC_IO4  / X4    out45Master-Slave SC-Communication / SD WP to Slave CPLD  
SC_IO5 / X5     out44Master-Slave SC-Communication / currently_not_used 
SC_IO6 / X6out43Master-Slave SC-Communication / Sanity check to other CPLD (FMC VADJ Enable) 
SC_IO7 / X7out42Master-Slave SC-Communication / Sanity check to other CPLD (FMC VADJ Enable) 
SC_IO8        22Master-Slave SC-Communication / currently_not_usedNC
SC_SCL  / SCL    in14I2C Mux U27 / currently_not_used 
SC_SDA / SDA      in13I2C Mux U27 / currently_not_used 
SC2_SW3 / SW3    in6DIP-Switch S5-3 
SC2_SW4 / SW4    in5DIP-Switch S5-4 
SD_WP        in100MMC SD  
SFP_LED1 / SFP_LED0out81SFP 
SFP_LED2 / SFP_LED1out82SFP 
SFP_LED3 / SFP_LED2out78SFP 
SFP_LED4 / SFP_LED3out83SFP 
SFP1_LOS      32SFP / currently_not_usedNC, controlled by FPGA
SFP1_TX_DIS  out33SFPNC, controlled by FPGA
SFP2_LOS      35SFP / currently_not_usedNC, controlled by FPGA
SFP2_TX_DIS  out34SFPNC, controlled by FPGA
STAT_LED0 / LED0 99LED D4 Green  
STAT_LED1 / LED1 128LED D1 Red  
USB0_RST / USB_RST   out71USB (U9) PHY ResetUSB PHY and HUB Reset
USBH_LED_G3   11USB Hub (U4) / currently_not_usedNC, other USB HUB
USBH_LED_G4   12USB Hub (U4) / currently_not_usedNC, other USB HUB
USBH_LED_SS1  9USB Hub (U4) / currently_not_usedNC, other USB HUB
USBH_LED_SS2 / dummyout133USB Hub (U4) Dummy Signal / currently_not_usedNC, other USB HUB
USBH_LED_SS3  132USB Hub (U4) / currently_not_usedNC, other USB HUB
USBH_LED_SS4  138USB Hub (U4) / currently_not_usedNC, other USB HUB
USBH_MODE0   out142USB Hub (U4)NC, other USB HUB
USBH_MODE1   out143USB Hub (U4)NC, other USB HUB
USBH_RST     out10USB Hub (U4)NC, other USB HUB
XMOD1_A       3J28 (XMOD 2) / currently_not_used 
XMOD1_B       2J28 (XMOD 2) / currently_not_used 
XMOD1_E   /XMOD_E out4J28 (XMOD 2 LED) 
XMOD1_G / XMOD_G  in1J28 (XMOD 2 Button) 

...

JTAGENB set carrier board CPLD into the chain for firmware update. For Update set DIP S4-3 to ON.

FMC JTAG is connected to XMOD2 JTAG. Set DIP S4-3 to OFF for FMC access.

PJTAG (MIO29..26) is connected to JTAF Pinheader J30Connector J30 JTAG is not used and looped back.

Power

FMC VADJ is 1.8V if S5-4 is ON else 1.2V.

...

SC10 is controlled by DP_RX when SC11 is zero else high impedance state. DP_TX controlled by SC10 and DP_DE controlled by SC11.SC12 is controlled by DP_HPD.

CAN

CAN is not used.

SD

_TX soured by SC18.

SC19 sourced by CAN_RX.

CAN_S sourced by S16.

SD

SD SD WP is forwarded to Slave CPLD.

...

RGPIO Pin to FPGAValue
0SW3
1SW4
2SD_WP
3XMOD_G
4MIO26'0'
5MIO27'0'
6MIO28'0'
7MIO29'0'
8CAN_FAULT
9PHY_LED0
10PHY_LED1
11PHY_LED2
12FMC_TDO
13FMC_CLKDIR
14JTAG_TRST
15JTAG_SRST
16JTAG_TCK'0'
17JTAG_TDI'0'
18JTAG_TMS'0'
19DP_HPD
20SDA
21SCL
22-23unused zero
24-27reserved
28-31Interface detection

...

Appx. A: Change History

Revision Changes

CPLD REV04 REV05 to REV05REV06

  • BUGFIX: renamed SC19 to SC17
  • Connect FMC JTAG to XMOD2 JTAG
  • Connect PJTAG0 (MIO29..26) to JTAG Pin Header J30
  • Connect CAN to PL
  • RGPIO Pin changes

CPLD REV04 to REV05

  • SD WP
  • XMOD LED
  • SD WP
  • XMOD LED access over PL

Older Revision (PCB REV03) to CPLD REV04

...

DateDocument RevisionCPLD Firmware RevisionSupported PCB RevisionAuthorsDescription

Page info
modified-date
modified-date
dateFormatyyyy-MM-dd

Page info
current-version
current-version
prefixv.


REV05REV06(REV02 Special Firmware!), REV03,REV04

Page info
modified-user
modified-user

  • small Update Pinout Table
2017-10-18

v.25

REV06(REV02 Special Firmware!), REV03,REV04John Hartfiel
  • Revision  06 finished

2017-06-20

v.23

REV05(REV02 Special Firmware!), REV03,REV04John Hartfiel
  • Document Bugfix, XMOD LED is connected to SC17
2017-06-12v.22REV05(REV02 Special Firmware!), REV03,REV04John Hartfiel-
  • Port description update
2017-06-09v.21REV05(REV02 Special Firmware!), REV03,REV04John Hartfiel
  • Revision  05 finished
2017-06-08v.17REV04(REV02 Special Firmware!), REV03,REV04John Hartfiel
  • document style update
2017-03-10v.15REV04(REV02 Special Firmware!), REV03,REV04John Hartfiel
  • Revision 04 finished
2016-12-14

v.1

--- 

Page info
created-user
created-user

  • Initial release
 All  

Page info
modified-users
modified-users

 

...