Organized by modules
TE0300 features TE0300 is provided with the following slide switches:
- S1: 1 1 x slide switch (system)
- S2: 1 1 x slide switch (system)
- S3: 1 1 x slide switch (system)
- S4: 1 1 x slide switch (system)
TE0320 is provided with features the following slide switches:
- S1: 4 x DIP slide switches (system)
- S2: 1 x slide switch (system)
- S5: 8 × x DIP slide switches (user)
TE0630 is provided with features the following slide switches:
- S1: 4 x DIP slide switches (system/user)
Organized by types
EEPROM switch (aka FX2 Firmware Configuration selection)
EEPROM enabled: a connection between EEPROM and USB FX2 microcontroller exists.
EEPROM disabled: a connection between EEPROM and USB FX2 microcontroller doesn't exist.
EEPROM switch:
- TE0300: S1
- TE0320: S1A
- TE0630: S1A
Tip |
---|
For all the switches above EEPROM is enabled when the switch is ON and the EEPROM is disabled when the switch is OFF. |
Tip |
---|
EEPROM switch is ON by default, to allow the USB FX2 microcontroller to read the serial EEPROM and enumerate as a custom/specific USB device. |
Power Rails Configuration
Power Rails Configuration:
- TE0300: S3
- TE0320: S2
- TE0630: S1B
Master Reset
Master Reset (aka Reset Line):
- TE0300: S2
- TE0320: S1D
- TE0630: it doesn't exist as a switch but only as a button.
FPGA Configuration selection
FPGA Configuration selection (Mode Pins):
- TE0300: two mode selection pin are hardwired (they do not exist as switches), only one exist as a switch: S4 (SPI+Jtag or only JTAG).
- TE0320: S1[B:C], more information here.
- TE0630: all mode selection pins are hardwired (they do not exist as switches). (user)