Page History

Custom_table_size_100

Page properties

hidden	true
id	Comments

Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM"

Template Change history:

Version	Changes	Author
4.2	Changes Xilinx to AMD	ED
4.1	Minor changes Notes Tables	ED
4.0	Rework for smaller TRM which can be generated faster Reduce Signal Interfaces Pin Reduce On Board Periphery Reduce Power Move Configuration Signals from Overview to own section	JH
3.12	Version History changed from list to table all changed title-alignment for tables from left to center	ma
3.11	update "Recommended Operating Conditions" section
3.1	New general notes for temperature range to "Recommended Operating Conditions"
3.02	add again fix table of content with workaround to use it for pdf and wiki Export Link for key features examples Notes for different Types (with and without Main FPGA) Export Link for Signals, Interfaces and Pins examples Notes for different Types (Modul, Modul Hybrid, Evalboard, Carrier)
3.01	remove fix table of content and page layout ( split page layout make trouble with pdf export) changed and add note to signal and interfaces, to on board periphery section ...(not finished)
3.00	→ separation of Carrier/Module and evaluation kit TRM
2.15	add excerpt macro to key features
2.14	add fix table of content add table size as macro

Page properties

hidden	true
id	Comments

Important General Note:

If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template:

Scroll Title

anchor	Figure_anchorname
title-alignment	center
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables

Scroll Title

anchor	Table_tablename
title-alignment	center
title	Text

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Example	Comment
1	2

The anchors of the Scroll Title should be named consistent across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
  - type: Figure, Table
  - main section:
    - "OV" for Overview
    - "SIP" for Signal Interfaces and Pins,
    - "OBP" for On board Peripherals,
    - "PWR" for Power and Power-On Sequence,
    - "B2B" for Board to Board Connector,
    - "TS" for Technical Specification
    - "VCP" for Variants Currently in Production
    - "RH" for Revision History
  - name: custom, some fix names, see below
- Fix names:
  - "Figure_OV_BD" for Block Diagram
  - "Figure_OV_MC" for Main Components
  - "Table_OV_IDS" for Initial Delivery State
  - "Table_PWR_PC" for Power Consumption
  - "Figure_PWR_PD" for Power Distribution
  - "Figure_PWR_PS" for Power Sequence
  - "Figure_PWR_PM" for Power Monitoring
  - "Table_PWR_PR" for Power Rails
  - "Table_PWR_BV" for Bank Voltages
  - "Table_TS_AMR" for Absolute_Maximum_Ratings
  - "Table_TS_ROC" for Recommended_Operating_Conditions
  - "Figure_TS_PD" for Physical_Dimensions
  - "Table_VCP_SO" for TE_Shop_Overview
  - "Table_RH_HRH" for Hardware_Revision_History
  - "Figure_RH_HRN" for Hardware_Revision_Number
  - "Table_RH_DCH" for Document_Change_History
Use Anchor in the document: add link macro and add "#<anchorname>
Refer to Anchor from external : <page url>#<pagename without space characters>-<anchorname>

Page properties

hidden	true
id	Comments

-----------------------------------------------------------------------

Page properties

hidden	true
id	Comments

Note for Download Link of the Scroll ignore macro:

Link to the base folder of the module (remove de/ or en/ from the URL):
Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Scroll Ignore
Download PDF version of this document.

Overview

The Trenz Electronic TE0726 is an industrial/extended grade module based on AMD Zynq 7 Series. It is Raspberry Pi form-factor compatible.

Refer to http://trenz.org/te0726-info for the latest online version of this manual and other available documentation.

Page properties

hidden	true
id	Comments

Notes :

short description of the PCB
Short Link of the wiki resources reference:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Key Features

Page properties

hidden	true
id	Comments

Note:
'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

→ See examples for different types <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

Excerpt

SoC/FPGA/Module
- Package: CLG225
- Device: Z-7007S, Z-7010, ¹⁾
- Temperature ranges: Commercial / Extended / Industrial ¹⁾
- Speed grades: -3, -2, -1 ¹⁾
RAM/Storage
- 512 MByte DDR3L ECC RAM ¹⁾
- 16 MByte QSPI Flash ¹⁾
- 2 KBit EEPROM for FTDI
- 2 KBit EEPROM for Ethernet & USB HUB
On Board
- System Controller CPLD
- USB ULPI Transceiver
- 10/100 Ethernet Transceiver with USB hub
- USB to JTAG / UART FTDI
Interface
- 1x Micro USB (UART/JTAG)
- 4x USB 2.0
- 1x microSD Card socket
- 1x Boot Select DIP switch
- 1x Ethernet RJ45 socket
- 1x TRRS Audio Jack 3.5mm with microphone (PWM audio only)
- 1x HDMI Connector
- 1x CSI-2 Connector (Camera Serial Interface)
- 1x DSI Connector (Display Serial Interface)
- 1x5 Pin Header for I²C
- 2x20 Pin Header with 26 GPIO, 1x I²C , 5 and 3.3 V
- 3 additional Pinheaders for CPLD access, Reset and PUDC (SoC Boot IO State) changes
Power
- via Micro USB
- via 5V Pin header
Dimension
- 56 mm x 85 mm, like Raspberry Pi
Notes
¹⁾Depends on assembly variant

Block Diagram

Page properties

hidden	true
id	Comments

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

Note

Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name.

Example: TE0812 Block Diagram

Note

All created DrawIOs should be named according to the Module name:

Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD

Scroll Title

anchor	Figure_OV_BD
title-alignment	center
title	TE0726 block diagram

Scroll Ignore

draw.io Diagram

border	truefalse

diagramName	Figure_OV_BD_TE0726_04
simpleViewer	false
width
links	auto
tbstyle	hidden
diagramDisplayName
lbox	true
diagramWidth	641
revision	12

Scroll Only

Main Components

Page properties

hidden	true
id	Comments

Note
For more information regarding how to add board photos, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_OV_MC
title-alignment	center
title	TE0726 main components

Scroll Ignore

draw.io Diagram

border	truefalse

diagramName	Figure_OV_MC_TE0726-04
simpleViewer	false
width
links	auto
tbstyle	hidden
diagramDisplayName
lbox	true
diagramWidth	642
height	639902
revision	12

Scroll Only

AMD 7 Series Zynq, U1
DDR3L ECC RAM, U8
SPI Flash, U5
System Controller CPLD, U11
FTDI USB to multipurpose JTAG/FIFO, U3
USB Transceiver, U18
Ethernet Transceiver LAN9514 with 4 port USB Hub , U2
EEPROM, U6 , U9
I²C Multiplexer, U10
Power Supply, U16, U17, U19, U20
USB power switch, U15 , U21
Oscillator, U14 , U13 , U7
LED, D1 , D2
Micro USB B receptacle, J1
microSD card, J9
2x USB A, J11 , J12
RJ-45 Ethernet connector, J10
HDMI connector, J6
DSI LCD connector, J4
CSI camera connector, J3
3.5mm RCA audio jack, J7
+5V Power Connector, J5
Boot DIP switch, S1
JTAG Port select header, J15
Boot IO State select header, J14
Externer reset header, J13
2x20 pin header, J8

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

Scroll Title

anchor	Table_OV_IDS
title-alignment	center
title	Initial delivery state of programmable devices on the module

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Storage device name	Content	Notes
Quad SPI Flash	not programmed
EEPROM FTDI	preprogrammed
EEPROM ETH	not programmed
System Controller CPLD	preprogrammed

Signals, Interfaces and Pins

Page properties

hidden	true
id	Comments

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designator List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

Connectors

Scroll Title

anchor	Table_SIP_C
title-alignment	center
title	Board Connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector Type	Designator	Interface	IO CNT	Notes
2x 20 2.54 mm Pin Header	J8	GPIO (HR)	26
2x 20 2.54 mm Pin Header	J8	I²C	2	Multiplexer U10
2x 2.54 mm Pin Header	J15	JTAG select	1	SoC or SC select
2x 2.54 mm Pin Header	J14	Boot IO State select	1
2x 2.54 mm Pin Header	J13	External reset	1
2x USB A stacked	J11, J12	USB 2.0	12	To USB PHY (ULPI)
5x 2.54 mm Pin Header	J2	I²C	2	Multiplexer U10, I²C shared with J4
5x 2.54 mm Pin Header	J2	Interrupt	1	Multiplexer U10
DIP switch	S1	Boot select	1	Shared with SPI
FCC	J4	MIPI DSI	6 (3 pairs)
FCC	J4	I²C	2	Multiplexer U10
FCC	J3	I²C	2	Multiplexer U10
FCC	J3	MIPI CSI-2	8 (4 pairs)
HDMI	J6	HDMI	8 (4 pairs)
HDMI	J6	I²C	2	Multiplexer U10
HDMI	J6	Interrupt	1	Multiplexer U10
Micro-USB 2.0 B	J1	JTAG	2 (1 pair)	SoC or SC selectable
microSD Card	J9	Interrupt	1	Multiplexer U10
microSD Card	J9	SD	5
RJ-45 Ethernet	J10	10/100 ETH	12	To USB PHY (ULPI)
TRRS 3.5 mm	J7	RCA Audio	2
TRRS 3.5 mm	J7	RCA Mic	1

Test Points

Scroll Title

anchor	Table_SIP_TPs
title-alignment	center
title	Test Points Information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Test Point	Signal	Notes
TP1	TDI
TP2	3.3V
TP3	TDO
TP4	1.8V
TP5	TCK
TP6	1.0V
TP7	TMS
TP8	1.35V
TP9	5V
TP10	GND
TP11	GND
TP12	GND
TP13	GND
TP14	POR B	Zync SoC reset signal
TP15	PG_1.35V	Power good signal
TP16	PG_1.8V	Power good signal
TP17	PG_3.3V	Power good signal
TP18	PG_1.0V	Power good signal
TP19	PUDC	Zynq SoC IO State during boot process
TP20	SPI0_DQ3/M0	Boot source select signal

On-board Peripherals

Page properties

hidden	true
id	Comments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Scroll Title

anchor	Table_OBP
title-alignment	center
title	On board peripherals

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Chip/Interface	Designator	Connected To	Notes
DDR3L RAM	U8	Zynq SoC DDR Interface PS Bank 502
System Controller CPLD	U11	Zynq SoC MIO Bank 35 MIDI DSI J4 MIDI CSI J3 FTDI U7 LEDs
USB-PHY	U18	Zynq SoC MIO and Zynq SoC USB ULPI
USB Ethernet Hub	J10	USB PHY USB A connectors J11 and J12 Power switch for USB A connectors U15, U21 ETH connector J10 EEPROM U9
FTDI	U3	JTAG to System Controller and Zynq SoC EEPROM U6
I²C Expander	U10	Zynq MIO (Bus master) DDR3L via Voltage Bridge U12 shared with MIDI CSI J3 MIDI DSI J4 and Pin Header J2 HDMI socket J6 Pin header J8
I²C Interrupts	U10	Zynq MIO (Bus master) microSD Card socket J9 inseration detection HDMI J6 inseration detection Pin header J2
Oscillator	U14	Zynq SoC - PS	33.3 MHz
Oscillator	U9	USB PHY	25 MHz
Oscillator	U7	FTDI	12 MHz

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Configuration and System Control Signals

Page properties

hidden	true
id	Comments

Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)

Scroll Title

anchor	Table_OV_CNTRL
title-alignment	center
title	Controller signal.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector	Signal Name	Direction¹⁾	Description
S1	SPI0_DDQ3 / MO	IN	Boot source switch, SPI flash or SD Card
J13	EXTRST , POR_B , nRST	IN	Reset Zynq SoC
J14	PUDC	IN	State of Zynq SoC IO lines during boot
J15	JMODE , BDBUS7	IN	JTAG endpoint selction, System Controller or Zynq SoC

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Power and Power-On Sequence

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Rails

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power

Scroll Title

anchor	Table_PWR_PR
title-alignment	center
title	Module power rails.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Connector + Pin	Direction¹⁾	Notes
USB_B_Vbus	J1	IN	Default power supply 5V
5V	J5.1	IN/OUT	2x Pin Header, intended for alternative powering
5V	J2.1 J8.2 , J8.4	OUT	5x Pin Header 2x 20 Pin Header
5V_HDMI	J6.18	OUT	HDMI, reverse current protection diode D11
V_BUS_A , V_BUS_B , V_BUS_C , V_BUS_D	J11.A1 , J11.B1 , J12.A1 , J12.B1	OUT	2x USB A socket
3.3V	J8.1 , J8.17 J3.15 J4.15 J9.4	OUT	2x 20 Pin Header FCC CSI FCC DSI microSD Card socket

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Recommended Power up Sequencing

Page properties

hidden	true
id	Comments

List baseboard design hints for final baseboard development.

Scroll Title

anchor	Table_BB_DH
title-alignment	center
title	Baseboard Design Hints

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Sequence

Net name

Recommended Voltage Range

Pull-up/down

Description

Notes

1

USB_B_Vbus

5V (± 5 %)

-

Main Power supply via Micro-USB J1.

Main module power supply. 0.5 A minimum. Power consumption depends mainly on design and cooling solution. If more current is needed use J5 for external power supply.

2

3.3V

-

Module generated output voltage.

3

-

External components which are connected to J8 should be powered up with 3.3V from module.

See link:
https://docs.amd.com/v/u/en-US/ds187-XC7Z010-XC7Z020-Data-Sheet
, page 8 "PL Power‐On/Off Power Supply Sequencing" for PL IO usage

Technical Specifications

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

Absolute Maximum Ratings ^*)

Scroll Title

anchor	Table_TS_AMR
title-alignment	center
title	Absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail / Schematic Name	Description	Min	Max	Unit
USB_B_Vbus	Determined through "USB 2.0 VBUS Max Limits"	4.75	5.5	V
5V	Determined through "USB 2.0 VBUS Max Limits"	4.75	5.5	V

^*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these
or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Variants of modules are described here: Article Number Information
Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.

Scroll Title

anchor	Table_TS_ROC
title-alignment	center
title	Recommended operating conditions.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Parameter	Min	Max	Units	Reference Document
USB_B_Vbus	4.75	5.25	V	Schematic of this board. SCH-TE0726-04-41C94-A.PDF page 3, table "Supported Voltage Ranges"
5V	4.75	5.25	V	Schematic of this board. SCH-TE0726-04-41C94-A.PDF page 3, table "Supported Voltage Ranges"

Physical Dimensions

Module size: 85 mm × 56 mm. Please download the assembly diagram for exact numbers.

PCB thickness: 1.57 mm ± 10 %.

Page properties

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guideline" .

Scroll Title

anchor	Figure_TS_PD
title-alignment	center
title	Physical Dimension

Scroll Ignore

draw.io Diagram

border	true

diagramName	Figure_TS_PD_TE0726-04
simpleViewer	false
width
links	auto
tbstyle	hiddentop
diagramDisplayName
lbox	true
diagramWidth	640
revision	1

Scroll Only

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Currently Offered Variants

Page properties

hidden	true
id	Comments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0706:

ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Scroll Title

anchor	Table_VCP_SO
title-alignment	center
title	Trenz Electronic Shop Overview

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Trenz shop TE0726 overview page
English page	German page

Revision History

Hardware Revision History

Page properties

hidden	true
id	Comments

Set correct links to download Carrier, e.g. TE0706 REV02:

TE0706-02 -> https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

Date format: YYYY-MM-DD
Example:
Date Revision Changes Documentation Link
2020-11-25 REV02
Resistors R14 and R15 was replaced by 953R (was 5K1)
Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02

Scroll Title

anchor	Figure_RV_HRN
title-alignment	center
title	Board hardware revision number.

Scroll Ignore

draw.io Diagram

top

border	true

diagramName	Figure_RH_HRN_TE0726-04
simpleViewer	false
width
links	auto
tbstyle	hidden
diagramDisplayName
lbox	true
diagramWidth	642
revision	1

Scroll Only

Scroll Title

anchor	Table_RH_HRH
title-alignment	center
title	Hardware Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision	Changes	PCN Link	Documentation Link
2023-06-10	04	Page Numbers refer to the schematic for this revision EOL components U16, U17 , U19, U20 (EN5311QI) were replaced by MPM3834CGPA Added MIC bias power L12, C114 , R151 (Page 16) Added Legal notices (Page 1) Added power diagram (Page 4) Added S1 switch and R152 for "JTAG only mode" enable (Page 8) The signals were renamed: SPI-DQ0/M0 ---> SPI-DQ0/M3 SPI-DQ3/M3 ---> SPI-DQ3/M0 ECC function has been added for U8 (Page 11) Added I2C level shifter U12 for DDR3 ECC function (Page 11) Added Buffers U24, U25 to match the level of signals (Page 6) Added Diode D7, resistors R155, R160 EOL components L1, L2, L3, L4, L6, L7, L9, L10 BKP0603HS121-T replaced by MPZ0603S121HT000 EOL components D8, D9 SP5001-04TTG replaced by EMI8042MUTAG Resistors R80-R82 replaced by 10 kOhm (was 1k43) Added Testpoints TP15 - TP20 The type of testpoints TP1 - TP14 was updated. Diameter changed from 0.8 mm to 1 mm CEC function is not supported. L11 was removed. C127, D5, R140, R42 are DNP Power-up sequencing was updated for new DC-DC supplies Capacitors C29, C32, C33 replaced by 470 nF (was 100 nF)	PCN-20230619 TE0726-03 to TE0726-04 Hardware Revision Change	TE0726-04
2021-01-21	03	Change DDR3 RAM (U8) from IM4G16D3FABG-125I to IS43TR16256BL-125KBLI Clock Revision Change (U7, U14) from SiT8008AI-... to SiT8008BI-... Clock Revision Change (U13) from SiT8008AI-... to SiT8008BI-... LEDs D1 and D2 changed to 19-213/G6C-BM1N2/DT and 19-213/R6C-AL1M2VY/3T Set S/N to not fitted	PCN-20210121 TE0726-03 DDR3 Change and Product Update	TE0726-03
2019-04-08	03	VBUS Resistor R94 replaced by 10 kOhm (was 12k1)	-	TE0726-03
2016-05-06	03	Introduced new variants: Default with DDR3L 128 Mb TE0726-03M with DDR3L 512 Mb TE0726-03L with DDR3L 128 Mb, without usb's, eth_phy, RJ-45, CSI, DSI, HDMI and 3.5mm jack connectors Changed FTDI to 56 pins package Moved LED's into Raspberry Pi 3 layout Replaced POWER connector on right angle connector Corected conection PUDC pin Replace HDMI, DSI/CSI connector, USB stacked connectors, RJ-45, power connector)	-	TE0726-03
2016-01-26	02	CSI CLK line moved to MRCC pin, CSI lanes swap CSI camera GPIO moved to MIO GPIO RPi GPIO 14,15 moved from MIO to PL Added 47 µF capacitor for SD Card VCC (required by SD spec) Added 47 µF capacitor for RPi camera - prevent voltage drop at camera init Fixed MODE pin strapping LED change 0603 Added POWER connector 2 pin Change HDMI ESD to ESD+EMI Fixed HDMI HPD and backpower DSI find solution for LS mode Fixed XADC power caps Changed LPDRR2 to DDR3L	-	TE0726-02
-	01	Inital board release	-	-

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Document Change History

Scroll Title

anchor	Table_RH_DCH
title-alignment	center
title	Document change history.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision

Contributors

Contributor

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat
showVersions	false

Page info

infoType	Modified by
type	Flat
showVersions	false

Removed editing bar from 2 pictures
Corrected figures BD and MC

2024-04-16

v.54

John Hartfiel

Updated to new TRM style.
Updated to board REV04.

2017-11-10

v.52

John Hartfiel

rework J8 header

2017-11-10

v.51

Ali Naseri

Updated Power section
added Power-Distribution diagram

2017-05-30

v.40

Jan Kumann

Absolute maximum ratings
Layout redesign
Wiki link fixed
SoC model removed from BD

2017-05-24

v.1

Jan Kumann

Initial version

.

--

all

Page info

infoType	Modified users
type	Flat
showVersions	false

--

Disclaimer

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Versions Compared

Old Version 53

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

DDR3L RAM

System Controller CPLD

USB-PHY

USB Ethernet Hub

FTDI

I²C Expander

I²C Interrupts

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Technical Specifications

Absolute Maximum Ratings ^*)

Recommended Operating Conditions

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 53

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

DDR3L RAM

System Controller CPLD

USB-PHY

USB Ethernet Hub

FTDI

I²C Expander

I²C Interrupts

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Technical Specifications

Absolute Maximum Ratings *)

Recommended Operating Conditions

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Absolute Maximum Ratings ^*)