...
- USB interface (to USB connector): connection with the host computer;
- I2C interface (to EEPROM): the I2C interface connects the USB controller to the EEPROM chip, which stores vendor ID and device ID. See chapter DIP Switch for available options.
- SPI interface (to FPGA and Flash): the SPI interface id used to communicate with the FPGA and to access the SPI serial Flash chip. The SPI interface allows a fast, frequent and non-volatile configuration of the TE0300 module (through J3) and TE0320 module (through B2B connection).
- FIFO interface (to FPGA): the FIFO interface provides a high-speed communication channel with the FPGA. The interface can transfer up to 48 MB/s burst rate.
...
{"serverDuration": 34, "requestCorrelationId": "faad3bd34e82e808"}