Page History

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

...

The carrier TEMB0005 is equipped with two different a Samtec Micro Blade B2B Connector according to number of pins and series. More information in the following table.

Scroll Title

anchor	Table_SIP_B2B
title	General PL I/O to B2B connectors information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Designator

Designators	Interface	I/O Signal Count	Connected to	Notes
J11	JTAG	4x Single Ended	FTDI, U1

I/O


GPIO	24x Single Ended, 12x Differential Pairs	CRUVI B2B, J5	A0...5, B0...5 (N/P)

I/O

GPIO

8x Single Ended

CRUVI B2B, J6

A_X0...7

I/O

GPIO

8x Single Ended

CRUVI B2B, J7

B_X0...7

I/O

GPIO	8x Single Ended	CRUVI B2B, J8	C_X0...7
LEDs	4x Single Ended	D1...4	LED1...4
I/O	8x Single Ended	Pmod Header, J9

CRUVI B2B Connectors

The TEMB0005 is equipped with three


Push Buttons	2x Single Ended	Push Button, S1-S2	M_RESET, Button
I2C	4x Single Ended	CRUVI B2B, J6-J5	2x I2C Channels
ETH	4x Single Ended, 2x Differential Pairs 2x Single Ended	RJ45 Socket, J1A RJ45 LEDs, J1B-J1C	2x LAne Transmit and Receive Yellow and Green LEDs
UART	2x Single Ended	FTDI, U1	UART RX/TX
FTDI I/O	2x

Scroll Title

anchor	Table_SIP_B2B
title	General PL I/O to B2B connectors information

Scroll Table Layout

orientation

portrait

sortDirection

ASC

repeatTableHeaders

default

style

widths

sortByColumn

sortEnabled

false

cellHighlighting

true

J11
4x 24x Single Ended, 12x Differential Pairs8x J68x J7RED LED, D8

Designator	Interface	I/O Signal Count	Connected to	Notes
JTAG	Single Ended	FTDI, U1		BDBUS2-BDBUS3
CLK	1x Single Ended 1x Single Ended	Oscillator, U8	GPIO	CRUVI B2B, J5	A0...5, B0...5 N/P	GPIO		30 MHz Reference Clock
Reset	1x Single Ended 1x	Single Ended	CRUVI B2B, J5 Push Button, S1	RESET M_RESET
MODE	1x	A_X0...7	GPIO	Single Ended	CRUVI B2B, J5
GPIO	7x	B_X0...7	GPIO	8x Single Ended	CRUVI B2B, J8	C_X0...7
LEDs	4x Single Ended	D1...4	LED1...4
I/O	8x Single Ended	Pmod Header, J9
Push Buttons	2x Single Ended	Push Button, S1-S2	M_RESET, Button
I2C	4x Single Ended	CRUVI B2B, J6-J5	2x I2C Channels
ETH	4x Single Ended, 2x Differential Pairs 2x Single Ended	RJ45 Socket, J1A RJ45 LEDs, J1B-J1C	2x LAne Transmit and Receive Yellow and Green LEDs
UART	2x Single Ended	FTDI, U1	UART RX/TX
FTDI I/O	2x Single Ended	FTDI, U1	BDBUS2-BDBUS3
CLK	1x Single Ended 1x Single Ended	Oscillator, U8 CRUVI B2B, J5	30 MHz Reference Clock
Reset	1x Single Ended 1x Single Ended	CRUVI B2B, J5 Push Button, S1	RESET M_RESET
MODE	1x Single Ended	CRUVI B2B, J5	GPIO	7x Single Ended	CRUVI B2B, J5	Power Signal	1x Single Ended
J5
Power Signal	1x Single Ended	RED LED, D8

CRUVI B2B Connectors

The TEMB0005 is equipped with three Low Speed Connectors J6...8 and a High Speed Connector J5. These connectors are provided for CRUVI extension cards.

Scroll Title

anchor	Table_SIP_B2B
title	CRUVI B2B connectors information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Speed	Designators	Schematic	Connected to	Notes
Low	J6	A_X0...1	B2B, J11	GPIO
		A_X2...5	B2B, J11	SC SPI
		A_X6...7	B2B, J11	I2C0 SDA/SCL
	J7	B_X0...7	B2B, J11	GPIO
	J8	C_X0...7	B2B, J11	GPIO
High	J5	A0...A5 (N/P)	B2B, J11
		B0...B5 (N/P)	B2B, J11
		MODE	B2B, J11
		RESET	B2B, J11
		SMB_ALERT SMB_SDA SMB_SCL	B2B, J11
		DI,DO,SCK,SEL	B2B, J11	SPI
		HSIO, HI, HO	B2B, J11

USB2.0 Socket

There is a USB2.0 Socket, J2 provided in order to communicate with the FTDI, U1. Data signals from USB2.0 are passed through a Line Filter L1 and a Diode U2 in order to be protected against inverse polarity connection.

...

Scroll Title

anchor	Table_SIP_ETH
title	RJ45 LAN Socket information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Pin	Schematic	Connected to	Notes
TD+	ETH1_TX_P	B2B, J11
TD-	ETH1_TX_N	B2B, J11
RD+	ETH1_RX_P	B2B, J11
RD-	ETH1_RX_N	B2B, J11
Green LED	ETH1_LED0	B2B, J11	Link/Activity indicator
Yellow LED	ETH1_LED1	B2B, J11	Speed indicator

PMod Header

There is a PMod Header, J9 connected to the B2B, J11 and all signals are protected from invers polarity by two diodes D6, D7.

Scroll Title

anchor	Table_SIP_PMod
title	General PL I/O to B2B connectors PMod Header information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Schematic

Connected to

Notes

...

Schematic	Connected to	Notes
PM0...3 (N/P)	B2B, J11

Pin Header

There is a Pin Header 6x1, J3 provided for SPI signals.

Scroll Title

anchor	Table_SIP_PinHeader
title	General PL I/O to B2B connectors information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Pin	Schematic	Connected to	Notes

...

	Notes
1	3.3V	B2B, J11
2	GND	B2B, J11
3	SC_SDO	B2B, J11
4	SC_SDI	B2B, J11
5	SC_SS	B2B, J11
6	SC_CLK	B2B, J11

UART

There is an UART channel provided in order to communicate with the module and signals are accessible via B2B, J11 through the FTDI, U1.

Scroll Title

anchor	Table_SPI_UART
title	CAN Tranciever interface MIOs

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

U1 Pin	Schematic

U?? Pin

Connected to	Notes

UART-Tx

Driver Input

BDBUS1	UART1_TXD	B2B, J11	FTDI receiver input
BDBUS0	UART1_RXD	B2B, J11	FTDI transmitter output

UART-RxReciever Output

JTAG Interface

JTAG access is provided through B2B connector J11 connected to the FTDI. For more information please refer to the FTDI section.

...

Scroll Title

anchor	Table_PWR_PR
title	Module power rails.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name	B2B Connector J11 Pin

JM1

CRUVI Connector J6 Pin	B2B Connector

JM2

J7 Pin	B2B Connector

JM3

J8 Pin	Direction	Notes
3.3V	1, 2, 3, 4	10	10	10
5VIN	-	12	12	12

Board to Board Connectors

Page properties

hidden	true
id	Comments

This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series,
For example: 6 x 6 SoM LSHM B2B Connectors
Include Page
PD:6 x 6 SoM LSHM B2B Connectors
PD:6 x 6 SoM LSHM B2B Connectors

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

Include Page
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors

CRUVI B2B Connectors

Include Page

	CRUVI B2B Connectors
	CRUVI B2B Connectors

...

Technical Specifications

Absolute Maximum Ratings

Scroll Title

anchor	Table_TS_AMR
title	PS absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Symbols	Description	Min	Max	Unit
VIN	Input Supply Voltage	-5	+5	V
T_STG	Storage Temperature	-55	160125	°C

Recommended Operating Conditions

...

Module size: 115 mm × 70 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 5 4 mm.

PCB thickness: 1.7 mm.

...

Trenz Electronic Documentation

Versions Compared

Old Version 17

New Version 18

Key

CRUVI B2B Connectors

CRUVI B2B Connectors

USB2.0 Socket

PMod Header

Pin Header

UART

JTAG Interface

Board to Board Connectors

Include Page
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors

CRUVI B2B Connectors

Technical Specifications

Absolute Maximum Ratings

Recommended Operating Conditions

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 17

New Version 18

Key

CRUVI B2B Connectors

CRUVI B2B Connectors

USB2.0 Socket

PMod Header

Pin Header

UART

JTAG Interface

Board to Board Connectors

Include Page3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors

CRUVI B2B Connectors

Technical Specifications

Absolute Maximum Ratings

Recommended Operating Conditions

Include Page
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors
3.1 x 5.6 Microsemi SmartFusion2 ST5 and SS5 B2B Connectors