Page History

Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"

Important General Note:

• Export PDF to download, if vivado revision is changed!

• Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

  • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

    • Figure template (note: inner scroll ignore/only only with drawIO object):

      Scroll Title
      anchor Figure_xyz title Text
      Scroll Ignore Create DrawIO object here: Attention if you copy from other page, use Scroll Only image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

      
      

    • Table template:

      • Layout macro can be use for landscape of large tables
      • Set column width manually (can be used for small tables to fit over whole page) or leave empty (automatically)

    • 
      

      Scroll Title
      anchor Table_xyz title Text
      Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true Example Comment 1 2

      
      

• ...

Notes :

• short description of the design

• Short Link of "Scroll only" macro:

  • Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info

  • List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Notes :

• Add basic key futures, which can be tested with the design

• Vitis/Vivado 2020.2

• RPI Camera 1.3 or 2.1

• HDMI

• PetaLinux

• SD

• USB

• I2C

• Special FSBL for QSPI programming

Notes :

• add every update file on the download

• add design changes on description

Notes :

• add known Design issues and general notes for the current revision

• do not delete known issue, add fixed version time stamp if  issue fixed

Notes :

• list of software which was used to generate the design

Notes :

• list of hardware which was used to generate the design
• mark the module and carrier board, which was used tested with an ^*

^*used as reference

^*used as reference

Notes :

• the content of the zip file

Notes :

• prebuilt files
• Template Table:

  • 
    

    Scroll Title
    anchor Table_PF title-alignment center title Prebuilt files
    Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true File File-Extension Description BIF-File *.bif File with description to generate Bin-File BIN-File *.bin Flash Configuration File with Boot-Image (Zynq-FPGAs) BIT-File *.bit FPGA (PL Part) Configuration File Boot Source *.scr Distro Boot file DebugProbes-File *.ltx Definition File for Vivado/Vivado Labtools Debugging Interface Debian SD-Image *.img Debian Image for SD-Card Diverse Reports --- Report files in different formats Hardware-Platform-Description-File *.xsa Exported Vivado hardware description file for Vitis and PetaLinux LabTools Project-File *.lpr Vivado Labtools Project File MCS-File *.mcs Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only) MMI-File *.mmi File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) OS-Image *.ub Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) Software-Application-File *.elf Software Application for Zynq or MicroBlaze Processor Systems SREC-File *.srec Converted Software Application for MicroBlaze Processor Systems

    
    

• Important set new Vivado version link on every Design update of new vivado version!

• Set Link to download folder (Remove ../de/.. ../en/.. from URL) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

• Basic Design Steps

• Add/ Remove project specific description

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>")

Note:

• Programming and Startup procedure

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.

Note:

• Description of Block Design, Constraints... BD Pictures from Export...

Note:

• optional for Zynq / ZynqMP only

• add basic PS configuration

#
# Common BITGEN related settings for TE0727 SoM
#
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design]

#
#
#
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLUP [current_design]

set_property PACKAGE_PIN G11 [get_ports {CEC_A[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {CEC_A[0]}]
set_property PACKAGE_PIN H13 [get_ports {HPD_A}]
set_property IOSTANDARD LVCMOS33 [get_ports {HPD_A}]
set_property PACKAGE_PIN G14 [get_ports {GLED[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {GLED[0]}]
set_property PACKAGE_PIN G12 [get_ports {IIC_A_scl_io}]
set_property PACKAGE_PIN H12 [get_ports {IIC_A_sda_io}]
set_property IOSTANDARD LVCMOS33 [get_ports {IIC_A_*}]
set_property PACKAGE_PIN K12 [get_ports {CT_HPD[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {CT_HPD[0]}]

set_property PACKAGE_PIN F12 [get_ports {HDMI_TXC_P}]
set_property PACKAGE_PIN E13 [get_ports {HDMI_TXC_N}]
set_property PACKAGE_PIN E11 [get_ports {HDMI_TX_P[0]}]
set_property PACKAGE_PIN E12 [get_ports {HDMI_TX_N[0]}]
set_property PACKAGE_PIN G15 [get_ports {HDMI_TX_P[1]}]
set_property PACKAGE_PIN F15 [get_ports {HDMI_TX_N[1]}]
set_property PACKAGE_PIN F14 [get_ports {HDMI_TX_N[2]}]
set_property PACKAGE_PIN F13 [get_ports {HDMI_TX_P[2]}]
set_property IOSTANDARD TMDS_33 [get_ports {HDMI_*}]

set_property PACKAGE_PIN J11 [get_ports {GPIO_tri_io[0]}]
set_property PACKAGE_PIN H11 [get_ports {GPIO_tri_io[1]}]
set_property PACKAGE_PIN J15 [get_ports {GPIO_tri_io[2]}]
set_property PACKAGE_PIN L15 [get_ports {GPIO_tri_io[3]}]
set_property PACKAGE_PIN N13 [get_ports {GPIO_tri_io[4]}]
set_property PACKAGE_PIN P8  [get_ports {GPIO_tri_io[5]}]
set_property PACKAGE_PIN M10 [get_ports {GPIO_tri_io[6]}]
set_property PACKAGE_PIN L12 [get_ports {GPIO_tri_io[7]}]
set_property PACKAGE_PIN M11 [get_ports {GPIO_tri_io[8]}]
set_property PACKAGE_PIN P10 [get_ports {GPIO_tri_io[9]}]
set_property PACKAGE_PIN P9  [get_ports {GPIO_tri_io[10]}]
set_property PACKAGE_PIN K15 [get_ports {GPIO_tri_io[11]}]
set_property PACKAGE_PIN M9  [get_ports {GPIO_tri_io[12]}]
set_property PACKAGE_PIN L13 [get_ports {GPIO_tri_io[13]}]
set_property PACKAGE_PIN L14 [get_ports {GPIO_tri_io[14]}]
set_property PACKAGE_PIN M15 [get_ports {GPIO_tri_io[15]}]
set_property PACKAGE_PIN J14 [get_ports {GPIO_tri_io[16]}]
set_property PACKAGE_PIN N14 [get_ports {GPIO_tri_io[17]}]
set_property PACKAGE_PIN K11 [get_ports {GPIO_tri_io[18]}]
set_property PACKAGE_PIN N9  [get_ports {GPIO_tri_io[19]}]
set_property PACKAGE_PIN J13 [get_ports {GPIO_tri_io[20]}]
set_property PACKAGE_PIN H14 [get_ports {GPIO_tri_io[21]}]
set_property PACKAGE_PIN R10 [get_ports {GPIO_tri_io[22]}]
set_property PACKAGE_PIN M14 [get_ports {GPIO_tri_io[23]}]
set_property PACKAGE_PIN P15 [get_ports {GPIO_tri_io[24]}]
set_property PACKAGE_PIN M12 [get_ports {GPIO_tri_io[25]}]
set_property PACKAGE_PIN K13 [get_ports {GPIO_tri_io[26]}]
set_property PACKAGE_PIN R15 [get_ports {GPIO_tri_io[27]}]
set_property IOSTANDARD LVCMOS33 [get_ports {GPIO_tri_io*}]

set_property PACKAGE_PIN N12 [get_ports {CSI_C_N}]
set_property PACKAGE_PIN N11 [get_ports {CSI_C_P}]
set_property PACKAGE_PIN R8  [get_ports {CSI_D_N[0]}]
set_property PACKAGE_PIN R7  [get_ports {CSI_D_P[0]}]
set_property PACKAGE_PIN R13 [get_ports {CSI_D_N[1]}]
set_property PACKAGE_PIN R12 [get_ports {CSI_D_P[1]}]
set_property IOSTANDARD LVDS_25 [get_ports {CSI_*}]
set_property PACKAGE_PIN N8  [get_ports {CLP_D_N[0]}]
set_property PACKAGE_PIN N7  [get_ports {CLP_D_P[0]}]
set_property PACKAGE_PIN P14 [get_ports {CLP_D_N[1]}]
set_property PACKAGE_PIN P13 [get_ports {CLP_D_P[1]}]
#set_property PACKAGE_PIN R11 [get_ports {CLP_C_N}]
#set_property PACKAGE_PIN P11 [get_ports {CLP_C_P}]
set_property IOSTANDARD HSUL_12 [get_ports {CLP_*}]
set_property PULLDOWN true [get_ports {CLP_*}]
set_property INTERNAL_VREF 0.6 [get_iobanks 34]
create_clock -period 6.250 -name csi_clk -add [get_ports CSI_C_P]

set_property IOSTANDARD HSUL_12 [get_ports {CLP_D_N[1]}]
set_property IOSTANDARD HSUL_12 [get_ports {CLP_D_N[0]}]
set_property IOSTANDARD HSUL_12 [get_ports {CLP_D_P[1]}]
set_property IOSTANDARD HSUL_12 [get_ports {CLP_D_P[0]}]
set_property IOSTANDARD LVDS_25 [get_ports {CSI_D_P[1]}]
set_property IOSTANDARD LVDS_25 [get_ports {CSI_D_P[0]}]

set_property PACKAGE_PIN P14 [get_ports {CLP_D_N[1]}]
set_property PACKAGE_PIN N8 [get_ports {CLP_D_N[0]}]
set_property PACKAGE_PIN P13 [get_ports {CLP_D_P[1]}]
set_property PACKAGE_PIN N7 [get_ports {CLP_D_P[0]}]
set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
connect_debug_port dbg_hub/clk [get_nets clk]

Note:

• optional chapter separate

• sections for different apps

----------------------------------------------------------

FPGA Example

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2020.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

• Modified Files: blconfig.h, bootloader.c
• Changes:
  
  • Add some console outputs and changed bootloader read address.
  • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2020.2 xilisf_v5_11

• Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

fsbl

TE modified 2020.2 FSBL

General:

• Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c (for hooks and board)

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  
  • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
  • CPLD access
  • Read CPLD Firmware and SoC Type
  • Configure Marvell PHY

fsbl_flash

TE modified 2020.2 FSBL

General:

• Modified Files: main.c
• General Changes:
  
  • Display FSBL Banner
  • Set FSBL Boot Mode to JTAG
  • Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2020.2 FSBL

General:

• Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
• Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
• General Changes: 
  
  • Display FSBL Banner and Device Name

Module Specific:

• Add Files: all TE Files start with te_*
  
  • Si5338 Configuration
  • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2020.2 FSBL

General:

• Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
• General Changes:
  
  • Display FSBL Banner
  • Set FSBL Boot Mode to JTAG
  • Disable Memory initialisation

zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

• optional chapter separate

• sections for linux

• Add "No changes." or "Activate: and add List"

#include <configs/zynq-common.h>
#include <configs/platform-auto.h>

/include/ "system-conf.dtsi"
/ {
};
  
  
/ {
    #address-cells = <1>;
    #size-cells = <1>;
   
    reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;
        // HDMI Output frame buffer
        hdmi_fb_reserved_region@1FC00000 {
            compatible = "removed-dma-pool";
            no-map;
            // 512M (M modules)
            reg = <0x1FC00000 0x400000>;
            // 128M (R modules)
            //reg = <0x7C00000 0x400000>;
        };
/*  // Use second frame buffer if you want separate area for camera image  
        camera_fb_reserved_region@1FC00000 {
            compatible = "removed-dma-pool";
            no-map;
            // 512M (M modules)
            reg = <0x1FC00000 0x400000>;
            // 128M (R modules)
            //reg = <0x7800000 0x400000>;
        };
*/ 
    };
   
    hdmi_fb: framebuffer@0x1FC00000 {           // HDMI out
        compatible = "simple-framebuffer";
        // 512M (M modules)
        reg = <0x1FC00000 (1280 * 720 * 4)>;    // 720p
        // 128M (R modules)
        //reg = <0x7C00000 (1280 * 720 * 4)>;   // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
        status = "okay";
    };
/*  // In "go through" mode only one framebuffer is used
    camera_fb: framebuffer@0x1FC00000 {         // CAMERA in
        compatible = "simple-framebuffer";
        // 512M (M modules)
        reg = <0x1FC00000 (1280 * 720 * 4)>;    // 720p
        // 128M (R modules)
        //reg = <0x7800000 (1280 * 720 * 4)>;   // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
*/ 
    vcc_3V3: fixedregulator@0 {
        compatible = "regulator-fixed";
        regulator-name = "vccaux-supply";
        regulator-min-microvolt = <3300000>;
        regulator-max-microvolt = <3300000>;
        regulator-always-on;
    };
};
  
&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};
  
/*
* We need to disable Linux VDMA driver as VDMA
* already configured in FSBL
*/


&video_out_axi_vdma_0 {
	// Solution 1: Disable standard VDMA driver (VDMA configuration should be done in the FSBL)
	status = "disabled";	
	// Solution 2: Configure VDMA using the custom driver (VDMA configuration in FSBL should be disabled)
    //compatible = "trenz,vdmafb";
    //width = <1280>;
    //height = <720>;
    //stride = <(1280 * 4)>;
    //format = "a8b8g8r8";
};

&video_in_axi_vdma_0 {
	// Solution 1: Disable satandard VDMA driver (VDMA configuration should be done in the FSBL)
	status = "disabled";
};

&gpio0 {
    interrupt-controller;
    #interrupt-cells = <2>;
};
  

/* I2C1 - for REV02 */ 
&i2c1 {
	#address-cells = <1>;
	#size-cells = <0>;

	i2cmux: i2cmux@70  {
		compatible = "nxp,pca9540";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x70>;

		ID_I2C@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
		};
		CSI_I2C@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
		};
	};
};



/* USB */  
/{
    usb_phy0: usb_phy@0 {
        compatible = "ulpi-phy";
        #phy-cells = <0>;
        reg = <0xe0002000 0x1000>;
        view-port = <0x0170>;
        drv-vbus;
    };
};
  
&usb0 {
    usb-phy = <&usb_phy0>;
} ;

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

SRC_URI += "file://devtool-fragment.cfg \
            file://0001-QSPI-s25fl127_8-2020_2.patch \
            "

Note:

• Add description for other Software, for example SI CLK Builder ...

• SI5338 and SI5345 also Link to:

  • Si5345

  • Si5338

• Note this list must be only updated, if the document is online on public doc!

• It's semi automatically, so do following

  • Add new row below first

  • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

  • Metadata is only used of compatibility of older exports