Page History

...

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   

   draw.io Diagram
   border true diagramName TE0803-04-Gap-Filler_PD simpleViewer false width 800 links auto tbstyle top diagramDisplayName lbox true diagramWidth 2286 revision 1

2. Carefully align the heatspreader and press it lightly.
   

   draw.io Diagram
   border true diagramName KK0803-04aufTE0803-04_PD simpleViewer false width 800 links auto tbstyle top diagramDisplayName lbox true diagramWidth 1208 revision 1

3. Set the torque screwdriver to 0.5Nm / 4.5 inlb.

4. Insert the Philips crosshead bit PH1.

5. Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
   (Fig. TE0808-05, similar.)
   
   
   

   Embed draw.io Diagram
   border true pageId 131728215 diagramDisplayName lbox true diagramName TE0808-05-KK-Schrrauben aspect veWVOmRvpG8wNeCd_lW- 1 includedDiagram 1 simpleViewer true width 400800 aspectHash 450ff7ae4051639d0e6ace82925d059592b56466 links auto tbstyle top

...