Page History

...

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   
   

   inc-drawio
   border true diagramName TE0817-01-GapFiller includedDiagram 1-Gap-Filler simpleViewer true width 400 links auto tbstyle top pageId 195203564 diagramDisplayName lbox true diagramWidth 1292 revision 1

   
   
   
2. Carefully align the heatspreader and press it lightly.
   
   

   inc-drawio
   border true diagramName TE0817-01mit33780 includedDiagram 1 simpleViewer true width 600 links auto tbstyle top pageId 195203564 diagramDisplayName lbox true diagramWidth 1126 revision 1

   
   
   

3. Set the torque screwdriver to 0.5Nm / 4.5 inlb.
   
   

4. Insert the Philips crosshead bit PH1.
   
   

5. Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
   
   

   inc-drawio
   border true diagramName TE0817mit33780bottom includedDiagram 1 TE0817-01mit33780bottom simpleViewer true width 400 links auto tbstyle top pageId 195203564 diagramDisplayName lbox true diagramWidth 954 revision 1

...