Page History

Custom_table_size_100

Page properties

hidden	true
id	Comments

Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM"

Template Change history:

Version	Changes	Author
4.2	Changes Xilinx to AMD	ED
4.1	Minor changes Notes Tables	ED
4.0	Rework for smaller TRM which can be generated faster Reduce Signal Interfaces Pin Reduce On Board Periphery Reduce Power Move Configuration Signals from Overview to own section	JH
3.12	Version History changed from list to table all changed title-alignment for tables from left to center	ma
3.11	update "Recommended Operating Conditions" section
3.1	New general notes for temperature range to "Recommended Operating Conditions"
3.02	add again fix table of content with workaround to use it for pdf and wiki Export Link for key features examples Notes for different Types (with and without Main FPGA) Export Link for Signals, Interfaces and Pins examples Notes for different Types (Modul, Modul Hybrid, Evalboard, Carrier)
3.01	remove fix table of content and page layout ( split page layout make trouble with pdf export) changed and add note to signal and interfaces, to on board periphery section ...(not finished)
3.00	→ separation of Carrier/Module and evaluation kit TRM
2.15	add excerpt macro to key features
2.14	add fix table of content add table size as macro

Page properties

hidden	true
id	Comments

Important General Note:

If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template:

Scroll Title

anchor	Figure_anchorname
title-alignment	center
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables

Scroll Title

anchor	Table_tablename
title-alignment	center
title	Text

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Example	Comment
1	2

The anchors of the Scroll Title should be named consistent across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
  - type: Figure, Table
  - main section:
    - "OV" for Overview
    - "SIP" for Signal Interfaces and Pins,
    - "OBP" for On board Peripherals,
    - "PWR" for Power and Power-On Sequence,
    - "B2B" for Board to Board Connector,
    - "TS" for Technical Specification
    - "VCP" for Variants Currently in Production
    - "RH" for Revision History
  - name: custom, some fix names, see below
- Fix names:
  - "Figure_OV_BD" for Block Diagram
  - "Figure_OV_MC" for Main Components
  - "Table_OV_IDS" for Initial Delivery State
  - "Table_PWR_PC" for Power Consumption
  - "Figure_PWR_PD" for Power Distribution
  - "Figure_PWR_PS" for Power Sequence
  - "Figure_PWR_PM" for Power Monitoring
  - "Table_PWR_PR" for Power Rails
  - "Table_PWR_BV" for Bank Voltages
  - "Table_TS_AMR" for Absolute_Maximum_Ratings
  - "Table_TS_ROC" for Recommended_Operating_Conditions
  - "Figure_TS_PD" for Physical_Dimensions
  - "Table_VCP_SO" for TE_Shop_Overview
  - "Table_RH_HRH" for Hardware_Revision_History
  - "Figure_RH_HRN" for Hardware_Revision_Number
  - "Table_RH_DCH" for Document_Change_History
Use Anchor in the document: add link macro and add "#<anchorname>
Refer to Anchor from external : <page url>#<pagename without space characters>-<anchorname>

Page properties

hidden	true
id	Comments

-----------------------------------------------------------------------

Page properties

hidden	true
id	Comments

Note for Download Link of the Scroll ignore macro:

Link to the base folder of the module (remove de/ or en/ from the URL):
Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Scroll Ignore
Download PDF version of this document.

Overview

The Trenz Electronic TEG2000 is a FPGA module integrating a CologneChip GateMate FPGA, a QSPI Flash, level shifter, LEDs and several clocking and power components necessary for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. All this on a tiny footprint, smaller than a credit card size at a very competitive price. All Trenz Electronic SoMs in 4 x 5 cm form factor are mechanically compatible.

Refer to http://trenz.org/teg2000-info for the current online version of this manual and other available documentation.

Page properties

hidden	true
id	Comments

Notes :

short description of the PCB
Short Link of the wiki resources reference:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Key Features

Page properties

hidden	true
id	Comments

Note:
'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

→ See examples for different types <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

Excerpt

SoC/FPGA/Module
- CologneChip GateMate A1 / A2 / A4 ¹⁾
- performance mode: economy, speed ¹⁾
- Temperature range: industrial (-20°C to 85°C)
RAM/Storage
- 16 MByte QSPI Flash ²⁾
On Board
- Oscillator
- 3 x LED
- Level shifter
Interface
- 2 x B2B Connector (LSHM)
- Configuration via Flash on board, USB or JTAG
- 2.5 Gb/s SerDes interface
- 2 x B2B Connector (LSHM)
  - up to 130 single ended IO / up to 57 differential pairs
  - JTAG
Power
- 3.3 V power supply via B2B Connector needed
Dimension
- 40 x 50 mm
Notes
¹⁾ Please, take care of the possible assembly options.
²⁾ Up to 16 MByte are possible.

Block Diagram

Page properties

hidden	true
id	Comments

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

Note

Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name.

Example: TE0812 Block Diagram

Note

All created DrawIOs should be named according to the Module name:

Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD

Scroll Title

anchor	Figure_OV_BD
title-alignment	center
title	TEG2000 block diagram

Scroll Ignore

draw.io Diagram

border	true

diagramName	TEG2000_OV_BD
simpleViewer	false
width
links	auto
tbstyle	top
lbox	true
diagramWidth	691
revision	2

Scroll Only

Main Components

Page properties

hidden	true
id	Comments

Notes :

Picture of the PCB (top and bottom side) with labels of important components
Add List below

Note
For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_OV_MC
title-alignment	center
title	TEG2000 main components

draw.io Diagram

border	true

diagramName	TEG2000_TRM_MainComp
simpleViewer	false
width
links	auto
tbstyle	top
lbox	true
diagramWidth	641
revision	2

Scroll Only

CologneChip GateMate FPGA, U1
QSPI Flash, U5
Power Switch, Q1
DCDC, U7, U8
Power Monitor, U9
Oscillator, U10, U3
LEDs, D1, D2, D3
B2B connector, JM2, JM1
Level shifter, U2
Optional additional Flash, U4
BUS-Transceiver, U6

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

Scroll Title

anchor	Table_OV_IDS
title-alignment	center
title	Initial delivery state of programmable devices on the module

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Storage device name	Content	Notes
Quad SPI Flash	Blinky Demo Design	U5

Signals, Interfaces and Pins

Page properties

hidden	true
id	Comments

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designator List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

Connectors

Scroll Title

anchor	Table_SIP_C
title-alignment	center
title	Board Connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector Type	Designator	Interface	IO CNT	Notes
B2B	JM1	SerDes	8
B2B	JM1	GPIO	48	Bank NB/EB/EA, powered by VCCIOA
B2B	JM1	GPIO	6	up to 3.3V due to level shifter, connected to Bank SB
B2B	JM1	GPIO	6	up to 1.8V, also connected to Bank SB
B2B	JM1	configuration Signals	3	EN1, PGOOD , MODE
B2B	JM2	GPIO	50	Bank NA/WB/WC, powered by VCCIOD
B2B	JM2	GPIO	18	Bank SA, powered by VCCIOC
B2B	JM2	JTAG	4	0..3.3VIN
B2B	JM2	MR	1	low active Reset
B2B	JM1	CLK	DIFF CLK

Test Points

Page properties

hidden	true
id	Comments

you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delete the Test Point section.

Example:

Test Point	Signal	Notes¹⁾
TP1	PWR_PL_OK

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Scroll Title

anchor	Table_SIP_TPs
title-alignment	center
title	Test Points Information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Test Point	Signal	Side	Notes¹⁾
TP1	NA_6_N TP1	top	FPGA IO
TP2	NA_6_P	top	FPGA IO
TP3	NB_B3	top	FPGA IO
TP4	NB_A3	top	FPGA IO
TP5	1V	bottom	1V power rail
TP6	DONE	bottom	FPGA CFG_DONE pin
TP7	PROG_B	bottom	FPGA RST_N pin
TP8	GND	bottom
TP9	GND	bottom
TP10	1V	top	1V power rail
TP11	1.8V	top	OUT, 1.8V power rail
TP12	VIN	top	VIN (3.3 - 5.0V)
TP13	3.3VIN	top
TP14	3.3V	top	OUT, 3.3V power rail
TP15	VCCIOA	top	IN 1.1V ... 2.7V, powers IO Banks NB/EB/EA
TP16	VCCIOC	top	IN 1.1V ... 2.7V, powers IO Bank SA
TP17	VCCIOD	top	IN 1.1V ... 2.7V, powers IO Banks NA/WB/WC
TP18	DONE	top	FPGA CFG_DONE pin
TP19	PROG_B	top	FPGA RST_N pin
TP20	GND	top
TP21	GND	top
TP22	FAILED_n	bottom	FPGA CFG_FAILED pin
TP23	FAILED_n	top	FPGA CFG_FAILED pin

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

On-board Peripherals

Page properties

hidden	true
id	Comments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

Chip/Interface	Designator	Connected To	Notes
ETH PHY	U10	B2B connector J1 SoC MIO	Gigabit ETH PHY

Scroll Title

anchor	Table_OBP
title-alignment	center
title	On board peripherals

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Chip/Interface	Designator	Connected To	Notes
QSPI Flash	U5	FPGA Bank CFG WA	SPIx4 Interface for FPGA configuration
Oscillator	U3	FPGA Bank SB, Pin IO_SB_A8	25 MHz
Oscillator	U10	JM1.16, JM1.18	differential 100 MHz Clock for Gigabit-Transceiver

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Configuration and System Control Signals

Page properties

hidden	true
id	Comments

Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)

Scroll Title

anchor	Table_OV_CNTRL
title-alignment	center

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector+Pin	Signal Name	Direction¹⁾	Description
JM1.28	EN1	IN	activates DC-DCs
JM1.30	PGOOD	OUT	Output from power monitor
JM1.32	MODE	IN	configuration mode - 0 → JTAG or 1 → SPI active Mode
JM2.18	MR	IN	low active Reset connected to the Power Monitor that triggers PROG_B (FPGA RST_N)
JM2.93 / JM2.95 / JM2.97 / JM2.99	TMS / TDI / TDO / TCK	Signal-dependent	JTAG configuration and debugging interface. JTAG reference voltage: 3.3V

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Power and Power-On Sequence

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Rails

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power

Scroll Title

anchor	Table_PWR_PR
title-alignment	center
title	Module power rails.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Connector + Pin	Direction¹⁾	Notes
VIN	JM1.1 / JM1.3 / JM1.5 / JM2.2 / JM2.4 / JM2.6 / JM1.8	IN	3.3 V - 5.0V, Micromodule Power
3.3VIN	JM1.13 / JM1.15	IN	Micromodule Power
VCCIOA	JM1.9 / JM1.11	IN
VCCIOC	JM2.5	IN
VCCIOD	JM2.7 / JM2.9	IN
3.3V	JM2.10 / JM2.12 / JM2.91	OUT	Power for Carrier, powers on module the level shifter, LEDs and control Pins
1.8V	JM1.39	OUT	Power for Carrier, On module it powers the Flash, FPGA VDD and Banks SB,WA
1V	--	--	Powers the FPGA core, PLLs and SerDes interface

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Recommended Power up Sequencing

Page properties

hidden	true
id	Comments

List baseboard design hints for final baseboard development.

Scroll Title

anchor	Table_BB_DH
title-alignment	center
title	Baseboard Design Hints

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Sequence	Net name	Recommended Voltage Range	Pull-up/down	Description	Notes
0	-	-	-	Configuration signal setup.	See Configuration and System Control Signals.
1	VIN	3.3 V - 5.0 V (± 5 %)	-	Main power supply
1	EN1	-	PU ¹⁾, 3.3VIN	power enable
1	PGOOD	-	PU ¹⁾, 3.3V	power good status.
2	3.3VIN	3.3 V (± 5 %)	-	Main power supply	Main module power supply. 0.5 A minimum. Power consumption depends mainly on design and cooling solution.
3	VCCIOA, VCCIOC, VCCIOD	1.1 V - 2.7 V	-	Bank Voltages	1.8 V on TE0703 Carrier

¹⁾ (on module)

Board to Board Connectors

Page properties

hidden	true
id	Comments

This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series,
For example: 4 x 5 SoM LSHM B2B Connectors
Include Page
4 x 5 SoM LSHM B2B Connectors
4 x 5 SoM LSHM B2B Connectors

Include Page

	4 x 5 SoM LSHM B2B Connectors
	4 x 5 SoM LSHM B2B Connectors

Technical Specifications

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

Absolute Maximum Ratings ^*)

Scroll Title

anchor	Table_TS_AMR
title-alignment	center
title	Absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Description	Min	Max	Unit
VIN	Micromodule Power	-0.3	6.5	V
3.3VIN	Micromodule Power	-0.3	6.5	V
VCCIOA	Bank NB/EB/EA voltage	-	2.75	V
VCCIOC	Bank SA voltage	-	2.75	V
VCCIOD	Bank NA/WB/WC voltage	-	2.75	V

^*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these
or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Variants of modules are described here: Article Number Information
Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.

Scroll Title

anchor	Table_TS_ROC
title-alignment	center
title	Recommended operating conditions.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Parameter	Min	Max	Units
VIN	3,135	5,25	V
3.3VIN	3,135	3,465	V
VCCIOA	1.1	2.75	V
VCCIOC	1.1	2.75	V
VCCIOD	1.1	2.75	V

Physical Dimensions

Module size: 40 mm × 50 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8 mm.

PCB thickness: 1.4 mm.

All dimensions are shown in millimeters.

Page properties

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guideline" .

Scroll Title

anchor	Figure_TS_PD
title-alignment	center
title	Physical Dimension

draw.io Diagram

border	true

diagramName	TEG2000_phy_dim
simpleViewer	false
width	600
links	auto
tbstyle	top
lbox	true
diagramWidth	1113
revision	2

Scroll Only

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Currently Offered Variants

Page properties

hidden	true
id	Comments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0706:

ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Scroll Title

anchor	Table_VCP_SO
title-alignment	center
title	Trenz Electronic Shop Overview

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Trenz shop TEG2000 overview page
English page	German page

Revision History

Hardware Revision History

Page properties

hidden	true
id	Comments

Set correct links to download Carrier, e.g. TE0706 REV02:

TE0706-02 -> https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

Date format: YYYY-MM-DD
Example:
Date Revision Changes Documentation Link
2020-11-25 REV02
Resistors R14 and R15 was replaced by 953R (was 5K1)
Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02

Scroll Title

anchor	Figure_RV_HRN
title-alignment	center
title	Board hardware revision number.

draw.io Diagram

border	true

diagramName	Figure_RV_HRN
simpleViewer	false
width
links	auto
tbstyle	top
lbox	true
diagramWidth	281
revision	1

Scroll Only

Scroll Title

anchor	Table_RH_HRH
title-alignment	center
title	Hardware Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision	Changes	Documentation Link
-	REV01	First Production Release	REV01

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Scroll Title

anchor	Table_RH_DCH
title-alignment	center
title	Document change history.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date

Revision

Contributor

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat
showVersions	false

Page info

infoType	Modified by
type	Flat
showVersions	false

initial revision

--

all

Page info

infoType	Modified users
type	Flat
showVersions	false

--

Disclaimer

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Versions Compared

Old Version 21

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

QSPI Flash

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings ^*)

Recommended Operating Conditions

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 21

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

QSPI Flash

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings *)

Recommended Operating Conditions

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Absolute Maximum Ratings ^*)