Page History
...
Storage device name | Content | Notes |
|---|---|---|
24AA025E48 EEPROM | Empty, not programmed | Valid MAC Adress Address from manufacturer |
SPI Flash OTP Area | Empty, not programmed | Except serial number programmed by flash vendor |
SPI Flash Quad Enable bit | Programmed | |
SPI Flash main array | demo design | |
EFUSE USER | Not programmed | |
EFUSE Security | Not programmed |
...
Parameter | Min on 7015 device | Max on 7015 device | Min on 7030 device | Max on 7030 device | Units | Notes |
|---|---|---|---|---|---|---|
Vin supply voltage | -0.3 | 6.0 | -0.3 | 6.0 | V | |
Vin33 supply voltage | -0.4 | 3.6 | -0.4 | 3.6 | V | |
| PL output drivers IO Bank supply voltage for HR I/O banks | -0.5 | 3.6 | -0.5 | 3.6 | V | |
PL output drivers IO Bank supply voltage for HP I/O banks | - | - | -0.5 | 2.0 | V | |
| I/O input voltage for HR I/O banks | -0.4 | 4.15 | -0.4 | 4.15 | V | |
| I/O input voltage for HP I/O banks | - | - | -0.55 | 4.15 | V | |
I/O input voltage (when VCCO = 3.3V) for VREF and differential I/O standards | -0.4 | 2.625 | -0.4 | 2.625 | V | |
| Receiver (RXP/RXN) and Transmitter (TXP/TXN) absolute input voltage | -0.5 | 1.26 | -0.5 | 1.26 | V | |
Voltage on JTAG pins | -0.4 | 4.15 | -0.4 | 4.15 | V | When Vin33 is powered |
Storage Temperature | -40 | +100 | -40 | +100 | C |
...
Overview
Content Tools