Page History
...
Storage device name | Content | Notes |
|---|---|---|
24AA025E48 EEPROM | Empty, User content not programmed | Valid MAC Address from manufacturer |
SPI Flash OTP Area | Empty, not programmed | Except serial number programmed by flash vendor |
SPI Flash Quad Enable bit | Programmed | |
SPI Flash main array | demo design | |
EFUSE USER | Not programmed | |
EFUSE Security | Not programmed |
...
Parameter | Min | Max | Units | Notes | |||||
|---|---|---|---|---|---|---|---|---|---|
Vin supply voltage | -0.3 | 6.0 | V | ||||||
Vin33 supply voltage | -0.4 | 3.6 | V | ||||||
| PL IO Bank supply voltage for HR I/O banks (VCCO) | -0.5 | 3.6 | V | ||||||
PL IO Bank supply voltage for HP I/O banks (VCCO) | -0.5 | 2.0 | V | TE0715-xx-15 does not have HP banks | |||||
| I/O input voltage for HR I/O banks | -0.4 | VCCO_X+0.55 | V | ||||||
| I/O input voltage for HP I/O banks | -0.55 | VCCO_X+0.55 | V | TE0715-xx-15 does not have HP banks | I/O input voltage (when VCCO = 3.3V) for VREF and differential I/O standards | -0.4 | 2.625 | V | in HR banks only |
| GT Receiver (RXP/RXN) and Transmitter (TXP/TXN) | -0.5 | 1.26 | V | ||||||
Voltage on Module JTAG pins | -0.5 3 | .75V (VCC JTAG VCCO_0+0.45V)55 | V | VCCO_0 is 3.3V nominal | |||||
Storage Temperature | -40 | +100 | C |
...
Overview
Content Tools