Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This Trenz Electronic Starter Kit  Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure.   See Shop Link shop link for detailed content.

...

Kit specific

Module and Carrier separately

...

  • - Wiki with

...

...

  •  contains prices, available stock, disposability, scope of delivery and more

AMD

...

Software and Driver

...

  • AMD Design Software with JTAG drivers and documentation

...

...

  • - All

...

  • AMD Software, Device Models and Libraries

...

Getting Started

Starter Kit is shipped with prebuilt Linux Example on SD. Newest version and sources are available on our download area: TE0808 Reference Designs

  1. Connect mains power and set power switch to on. See Main Power Enclosure Location

  2. Connect mini USB cable to host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture, the one with green dot, closer to the SoM)
  3. Insert SD-Card with pre-loaded content into SD-Card slot.
  4. Open Serial Console:
    1. COM Port: for correct number see device manager
    2. Speed:115200
  5. Press the Power on button on the enclosure. See Power Button, Reset Button, HDD LED and Power LED Enclosure Location
  6. Linux login:
    1. User Name:root
    2. Password:root

Important Notes

 

Warning
Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM
Note

ES devices are not included in all Vivado versions, for ES1 only:

activate beta device see: FAQ - How can I activate beta devices?

Note

For all Starter Kit's shipped before 2017-06-21:

Enclosure Power and HD LED was swapped on connector. See  "Starter Kit Cable Connection - Enclosure Power Button , Reset Button, HDD LED and Power LED" section for correct connection.

 

Starter Kit Basic

Main Power Enclosure Location

Image Removed

Power Button , Reset Button, HDD LED and Power LED Enclosure  Location

Image Removed

 

Warning
 Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM

...

TE0790-02

(with green dot)

...

DIP-SchalterS4
S4.1OFF
S4.2OFF
S4.3OFF
S4.4ON

...

DIP-SchalterS5
S5.1ON
S5.2ON
S5.3OFF
S5.4OFF

...

 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF

...

 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF

Starter Kit will be shipped with all cable connected.

ATX Power

Image Removed

Module

Image Removed

FMC FAN

Image Removed

XMODs

Image Removed

Enclosure USB

Image Removed

Enclosure FAN1 and HDAUDIO

Image RemovedImage Removed

Enclosure Power Button , Reset Button, HDD LED and Power LED

...

Support