Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This Trenz Electronic Starter Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure. See shop link for detailed content.

...

...

  • - Wiki with TRM, reference projects, application notes and more

...

...

...

  • firmware with projects, schematics, hardware designs, 3D models and more
  • TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

...

  • -Starter-Kit - contains prices, available stock, disposability, scope of delivery and more

Xilinx Software and Driver


Additional Documentation

Table of Contents

Important Notes

Warning
Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM


Note

ES devices are not included in all Vivado versions, for ES1 only:

activate beta device see: FAQ - How can I activate beta devices?


Note

For all Starter Kit's shipped before 2017-06-21:

Enclosure Power and HD LED was swapped on connector. See "Enclosure Power Button, Reset Button, HDD LED and Power LED"  section for correct connection.

Getting Started

Starter Kit Basic

Main Power Enclosure Location

Image Added

Power Button , Reset Button, HDD LED and Power LED Enclosure  Location

Image Added


Warning
 Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM


TEBF0808

TE0790-02

(with green dot)

TE0790-02L


DIP-SchalterS4
S4.1OFF
S4.2OFF
S4.3OFF
S4.4ON



DIP-SchalterS5
S5.1ON
S5.2ON
S5.3OFF
S5.4OFF



 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF



 DIP-SchalterS1
S1.1ON
S1.2OFF
S1.3OFF
S1.4OFF


SI5345 NVM on the module is not programmed on factory, so modified FSBL is needed to get running output CLKS.

It is possible to program NVM of the SI5345 2 times, see Si5345

Starter Kit will be shipped with all cable connected.

ATX Power

Image Added

Module

Image Added

FMC FAN

Image Added

XMODs

Image Added

Enclosure USB

Image Added

Enclosure FAN1 and HDAUDIO

Image AddedImage Added

Enclosure Power Button , Reset Button, HDD LED and Power LED

Image AddedImage Added

Support