Page History
...
| Scroll Only (inline) |
|---|
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/TE0701 |
The Trenz Electronic TE0701 Carrier Board is a base-board for 4x5 SoMs, which exposes the MIO- and the PS/PL-pins of the SoM to accessible connectors and provides a whole range of on-board-componentes to test and evaluate Trenz Electronic 4x5 SoMs.
...
The TE0701 has on-board USB 2.0 High Speed to UART/FIFO IC FT2232HQ from FTDI. Channel A can be used as JTAG-Interface (MPSSE) to program the System-Controller-CPLD, Channel B can be used as UART-Interface routed to CPLD. There also 4 additionally bus-lanes available for user-specific use. The FT2232HQ-Chip can also be used as FIFO -Bufferin FT245 asynchronous mode.
There is also a standard 256 Byte EEPROM connected to the FT2232HQ-chip available to store custom configuration settings. EEPROM settings can be changed using FTDI provided tools that can be downloaded from FTDI website. See FTDI website for more information.
...
| date | revision | authors | description |
|---|---|---|---|
| 2016-11-29 | Ali Naseri | TRM update due to new revision 06 of the carrier board. | |
| 2016-11-28 | 1.0V4 | Ali Naseri | TRM adjustment to the newest revision (05) of TE0701 Carrier Board. |
| 2014-02-18 | 0.2
| Sven-Ole Voigt | TE0701-03 (REV3) updated |
| 2014-01-05 | 0.1 | Sven-Ole Voigt | Initial release |
All |
...
| Date | Revision | Notes | PCN | Documentation link | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| - | 06 | additional Jumper J16 and switch S4 for setting VCCIO FMC_VADJ. | PCN-20161128 | |||||||
| - | 0105 | Prototypeimproved manufacturing | TRM-TE0701-05 | |||||||
| - | 0204 | Prototype|||||||||
| - | 03 | changed DC/DC converters | ||||||||
| - | 0402 | Prototype | ||||||||
| - | 05 | improved manufacturing | TRM-TE0701-05 | - | 06 | 01 | Prototype |
Figure 4: Hardware revision Number
...
Overview
Content Tools