Page History
...
Jumper J12 | 1-2 | 2-3 | Voltage |
---|---|---|---|
VCCIOC | ON | OFF | 1.8 V |
VCCIOC | OFF | ON | 3.3 V |
Note |
---|
It is recommended to set and measure the PL IO-bank supply-voltages before mounting of the TE 4x5 module, to avoid failures and damages to the functionality of the mounted SoM. |
Info |
---|
Header J9 exposes the SoM's VBAT-pin to an accessible connector. Please refer to the SoM's documentation regarding the operation conditions of this pin. |
...
Overview
Content Tools