Page History

...

If VCCIOA or VCCIOC  will be powered through the dedicated pins of external connector J6, then corresponding VCCIO jumpers J10 and J12 should be removed.

...

Base-board supply-voltage configuration

Refer to the 4x5 Module Integration Guide for VCCIO voltage options.

...

Base-board supply-voltages (VCCIOA, VCCIOB, VCCIOC) configurationselection-jumpers.

Following table shows how to configure the voltage-levels of base-board supply-voltages VCCIOA, VCCIOB and VCCIOC by jumper, 0-Ohm-resistor or by feeding the supply voltage through connector J6:

...