Page History
...
- 6-pin header J26 for selecting Bank34 VCCIO voltage
- 6-pin header J27 for selecting XMOD/JTAG reference voltage
- Samtec Razor Beam™ LSHM-150 B2B connector JM1
- Samtec Razor Beam™ LSHM-150 B2B connector JM2
- JTAG/UART header JX1 ('XMOD FTDI JTAG Adapter'-compatible pin-assignment)
- Ultra small SMT coaxial connector J5
- Ultra small SMT coaxial connector J6
- Ultra small SMT coaxial connector J7
- Ultra small SMT coaxial connector J8
- User LED D1 (green)
- User LED D2 (red)
- LED D3 (red) indicating 'Programming DONE'-signal from module's FPGA
- SFP+ Connector J1
- 10-pin header soldering-pads J4 for access to SoM's PL IO-banks (LVDS-pairs possible)
- 16-pin header soldering-pads J3, JTAG/UART header ('XMOD FTDI JTAG Adapter' compatible pin-assignment) with 4 additional pins for reference-clock input to 4 x 5 cm SoM and one LVDS-pair for analog signal input
- 50-pin header soldering-pads J20 for access to SoM's PL IO-banks (LVDS-pairs possible)
- 50-pin header soldering-pads J17 for access to SoM's PL IO-banks (LVDS-pairs possible)
...
- SFP+ connector (Enhanced small form-factor pluggable), supports data transmission rates up to 10 Gbit/s
- 4 Hirose Ultra small SMT coaxial connectors, supports data transmission rates up to 6 Gbit/s
- TE 4 x 5 cm SoM programable by JTAG header (JX1)
- 2 x user LEDs routed to IO-pins of the SoM
- Soldering-pads J17 and J20 as place-holder for further possibilities to for optional pin headers for access to SoM's IO-bank-pins, usable as LVDS-pairs
- Soldering-pads J3 and J4 as place-holder for optional pin headers for access to further interfaces and IO's of the SoM
...
Connector | 3.3V pin | GND pin |
---|---|---|
JX1 | JX1-5, JX1-6, | JX1-1, JX1-2 |
J3 | J3-5 | J3-1, J3-2 |
J4 | J4-5 | J4-1, J4-2 |
J20 | J20-5, J20-46 | J20-1 , J20-2 , J20-49 , J20-50 |
J17 | J17-5, J17-46 | J17-1 , J17-2 , J17-49 , J17-50 |
...
Overview
Content Tools