Page History
...
The TEBB0714 Carrier Board there provides a SFP+ connector J1 (Molex 74441-0001 at board-rev. 01 : Molex 74441-0001). The connector is embedded into a SFP cage J2 (Molex 74737-0009 at board-rev. 01: Molex 74737-0009).
The RX-/TX-data-lanes are connected to B2B-connector JM1, the control-lines are connected to pins on B2B-connector JM2.
...
LED designator | color | pin net-name | B2B-connector | indicating |
---|---|---|---|---|
D1 | green | GLED | JM2-26 | available to user |
D2 | red | RLED | JM2-24 | available to user |
D3 | red | DONE | JM1-96 | FPGA-modul programmed properly |
Table 4: LED's funtionalityfunctionality
Place holders for optional pin-headers
...
Note |
---|
It is recommended to set and measure the PL IO-bank supply-voltages before mounting of TE 4x5 module to avoid failures and damages to the functionality of the mounted SoM. |
Technical Specifications
Absolute Maximum Ratings
...
Overview
Content Tools