Versions Compared

Old Version 7

changes.mady.by.user Jan Kumann

Saved on

compared with

New Version 8

changes.mady.by.user Jan Kumann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Default MIO Mapping

Bank 500 MIOs

MIO

FunctionNotes
0

MIO0_INT

Interrupt signal from I2C MUX.
1SPI0_CSSPI chip select.
2SPI0_DQ0/M0Bi-directional data line 0
3SPI0_DQ1/M1Bi-directional data line 1
4SPI0_DQ2/M2Bi-directional data line 2
5SPI0_DQ3/M3Bi-directional data line 3
6SPI0_SCKSPI clock.
7MIO7RESETB of USB3320 chip, U18
8MIO8System Controller CPLD pin 28
9MIO9System Controller CPLD pin 29
10SD_D0Serial data 0.
11SD_CMDCommand/Response.
12SD_CLKSerial clock.
13SD_D1Serial data 1.
14SD_D2Serial data 2.
15SD_D3Serial data 3.


Bank 501 MIOs

 MIOFunctionNotes
28OTG-DATA4ULPI bi-directional data bus.
29OTG-DIRData bus direction control signal.
30OTG-STPData throttle signal.
31OTG-NXTData stream stop.
32OTG-DATA0ULPI bi-directional data bus.
33OTG-DATA1ULPI bi-directional data bus.
34OTG-DATA2ULPI bi-directional data bus.
35OTG-DATA3ULPI bi-directional data bus.
36OTG-CLKULPI clock.
37OTG-DATA5ULPI bi-directional data bus.
38OTG-DATA6ULPI bi-directional data bus.
39OTG-DATA7ULPI bi-directional data bus.
48MUX_SCLI2C clock to I2C MUX.
49MUX_SDAI2C data to/from I2C MUX.
52MIO52System Controller CPLD pin 20
53MIO53System Controller CPLD pin 21

LED's

There are two LEDs on TE0726 module:

...

Normally TE0726 module is powered by micro-USB connector J1 VBUS pin, which voltage level is controlled by host according to the USB standards and should be 5V, so there is not much user can control here if using standard USB equipment. However if power.

Absolute Maximum Ratings

Parameter

MinMax

Units

Notes

Power supply voltage

2.7

5.5

V

See AP2152SG-13 datasheet. Not applicable if TE0726 module is powered by micro-USB connector J1 as VBUS pin voltage level of 5V is controlled by the supplying side equipment.

Storage temperature

-55

+125

°C

-

...

ParameterMinMaxUnitsNotes
Power supply voltage

25.70

5.5VSee AP2152SG-13 datasheet.
Operating temperature070

°C

-

...