Page History

...

6-pin header J26 for selecting Bank34 VCCIO voltage
6-pin header J27 for selecting XMOD/JTAG reference voltage
Samtec Razor Beam™ LSHM-150 B2B connector JM1
Samtec Razor Beam™ LSHM-150 B2B connector JM2
JTAG/UART header JX1 ('XMOD FTDI JTAG Adapter'-compatible pin-assignment)
Ultra small SMT coaxial connector J5
Ultra small SMT coaxial connector J6
Ultra small SMT coaxial connector J7
Ultra small SMT coaxial connector J8
User LED D1 (green)
User LED D2 (red)
LED D3 (red) indicating 'Programming DONE'-signal from module's FPGA
SFP+ Connector J1
10-pin header soldering-pads J4 for access to SoM's PL IO-banks (LVDS-pairs possible)
16-pin header soldering-pads J3, JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible pin-assignment)
50-pin header soldering-pads J20 for access to SoM's PL IO-banks (LVDS-pairs possible)
50-pin header soldering-pads J17 for access to SoM's PL IO-banks (LVDS-pairs possible)

...

Note
It is recommended to set and measure the PL IO-bank supply-voltages before mounting of TE 4x5 module to avoid failures and damages to the functionality of the mounted SoM.

Technical Specifications

...