Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 3 x Samtec ASP-122953-01 160-pin stackable, compatible with TE0782TE078x
  • 2 mm MC LB2-A Soldered Connector for power supply (12V input)
  • 4 SMA connectors for MGT
  • 2 x 12 pin headers for XMOD
  • 1 x DIP switch for modules CPLD Access
  • 2 x RJ45 Connector
  • USB A Stacked Connector 
  • Equipped with two TE0790 XMOD FTDI JTAG adapters, TE0790 and TE0790-xxL
  • Voltage regulator for 5V and 3.3Vregulators
  • Dimension: 115 x 115 mm
  • Two preassembled TE0790 XMOD FTDI JTAG adapters

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEBT0782 block diagram


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision812
diagramNameTEBT0782_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only

Image Modified


Main Components

...

Scroll Title
anchorFigure_OV_MC
titleTEBT0782 main components


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision8
diagramNameTEBT0782_OV_MC
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth440


Scroll Only

Image Modified


  1. RJ45 Transceivers, J1-J2
  2. USB A Stacked, U7
  3. XMOD JTAG/UART Adapter, J7
  4. JTAG CPLD Adapter -J8
  5. 2 Line Common Mode Choke, J10
  6. Non-isolated power jack (VIN), J9-J11
  7. DIP Switch, S1
  8. SMA Coxial Connectors (MGT_TX), J3-J4
  9. SMA Coxial Connectors (MGT_RX), J5-J6
  10. Board to Board Connector, JB1
  11. Board to Board Connector, JB3
  12. Board to Board Connector, JB2

...

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

The general Reset is provided through button S1 on TE0790 XMOD J7.

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2BNote

RESIN

JBC3-130Board Reset


...

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator Designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

...

Scroll Title
anchorTable_SIP_B2B
titleGeneral I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B ConnectorInterfaceNumber of I/ONotes
JB1








RJ45, J1B-J1C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J1A4 Differential pair, 8 Single EndedPHY1 MDIO
RJ45, J2B-J2C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J2A4 Differential pair, 8 Single EndedPHY2 MDIO
TE0790 Base, J84 Single Ended
TE0790 Base, J71 Single Ended
USB A Stacked, U72 Single EndedUSB
Power Switch, U12 Single Ended
SMD Line Filter, L61 Differential pair, 2 Single EndedUSB1_D
SMD Line Filter, L71 Differential pair, 2 Single EndedUSB2_D
ESD protection diode, U51 Single EndedUSB1_VBUS
ESD protection diode, U81 Single EndedUSB2_VBUS
JB2

Module TE078x FPGA, Bank 111-11216 Differential pair, 32 Single EndedMGT_RX8...15, MGT_TX8...15
Module TE078x FPGA, Bank 341 Differential pair, 2 Single Ended

J1_B34_VRP, J1_B34_VRN

Module TE078x FPGA, Bank 341 Differential pair, 2 Single EndedJ1_B33_VRP, J1_B33_VRN
JB3



TE0790 Base, J84 Single EndedM_TCK, M_TMS, M_TDO, M_TDI
TE0790 Base, J7

4 Single Ended

2 Single Ended

1 Single Ended

TCK, TMS, TDO, TDI

UART RX/TX

RESIN

DIP Switch, S1-A1 Single EndedJTAGENB
SMA Coaxial, J3...62 Differential pair, 4 Single EndedMGT_RX0, MGT_TX0
Module TE0782...4 FPGA, Bank 109-11016 Differential pair, 32 Single EndedMGT_RX1...7, MGT_TX0...7


XMOD Pin Header

JTAG

...

/UART to Module SoC/FPGA

JTAG JTAGs access to the TE078x SoM are is available through B2B connector JB3.    JTAG access is provided by TE0790 XMOD Adapter on Pin Header J7.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Interface Pins

Signal

B2B Connector

Notes
M_TMSJB3B-182JTAG
M_TDIJB3B-187JTAG
M_TDOJB3B-188JTAG
M_TCKJB3B-181JTAG

JTAG access to the LCMXO2-1200HC System Controller CPLD is provided through B2B connector J3.

Name

B2B Connector

Notes
AXMOD_AJB3C-129UART
BXMOD_BJB3C-135UART
CTCKJB3C-141JTAG
DTDOJB3C-148JTAG
ECPLD_GPIO4JB1A-18
FTDIJB3C-147JTAG
GRESINJB3C-130General Reset
HTMSJB3C-142JTAG
3.3V3.3V_MJB1- JB3
VIO3.3V_MJB1- JB33.3V


JTAG/ GPIO to Module CPLD

JTAG access to the System Controller CPLD is provided through B2B connector J3. JTAG access to CPLD is provided by TE0790 XMOD Adapter on Pin Header J8.

Pin 'JTAGENB' must be set high, using DIP Switch S1-A in order to program the System Controller CPLD via JTAG interaface.

Scroll Title
anchorTable_SIP_CPLDJTG
titleCPLD JTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Interface Pins

Signal Name

B2B Connector

Notes
ACPLD_GPIO0JB1A-10
BCPLD_GPIO1JB1A-12
CM_TCKJB3B-81
DM_TDOJB3B-88
ECPLD_GPIO2JB1A-14
FM_TDIJB3B-87
GCPLD_GPIO3JB1A-16
HM_TMSJB3B-82
3.3V3.3V_CPLDJB1- JB3
VIO3.3V_CPLDJB1- JB33.3V


DIP Switch S2 on TE0790 must be set and fixed like the following tablePin J3-136 'JTAGENB' of B2B connector J3 is used to access the JTAG interface of the SC CPLD. Set it high using DIP Switch S1-A in order to program the System Controller CPLD via JTAG interaface.

B2B Connector
Scroll Title
anchorTable_SIP_JTG_CPLDJTGDIP
titleCPLD JTAG pins connectionXMOD DIP Switch Setting

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP Switch

Setting

JTAG Signal

Notes
TMSJB3C-142CPLD JTAGTDIJB3C-147CPLD JTAGTDOJB3C-148CPLD JTAGTCK

JB3C-141

S2-1ONJTAGENB (Enable/Disable module JTAG CPLD IOs)
S2-2OFFNC
S2-3OFFNC
S2-4OFFNC
CPLD JTAG


RJ45 Connectors

Scroll Title
anchorTable_SIP_RJ45
titleRJ45s Connections to B2B Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NameRJ45-J1 PinRJ45-J2 PinNotes
B2B
PHY_MDI0_PJB1A-23JB1A-39
PHY_MDI0_NJB1A-21JB1A-37
PHY_MDI1_PJB1A-19JB1A-35
PHY_MDI1_NJB1A-17JB1A-33
PHY_MDI2_PJB1A-15JB1A-31
PHY_MDI2_NJB1A-13JB1A-29
PHY_MDI3_PJB1A-11JB1A-27
PHY_MDI3_NJB1A-9JB1A-25
J2_TX9_PJB1A-95-LED Green/Yellow
J2_TX9_NJB1A-97-LED Green/Yellow
J2_RX9_N-JB1A-96LED Green/Yellow
J2_RX9_P-JB1A-98LED Green/Yellow


USB A Stacked Socket

The USB A Stacked , (U7) is a dual port USB Socket which provides two USB ports.

Scroll Title
anchorTable_SIP_USB
titleDual Port USB Connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NamePort APort BNotes
B2BConnected to B2BConnected to 
USB_D_PJB1A-28SMD Line Filter, L7JB1A-40SMD Line Filter, L6
USB_D_NJB1A-26SMD Line Filter, L7JB1A-38SMD Line Filter, L6
USB_VBUSJB1A-24SMD Line Filter, L7JB1A-36SMD Line Filter, L6
VBUS_V_ENJB1A-30Power Switch, U1 JB1A-32Power Switch, U1 


SMA Coaxial 

The TEBT0782 carrier is equipped with 4x SMA Coaxial straight connectors.

Scroll Title
anchorTable_SIP_SMA
titleSMAs Connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator SchematicB2BNotes
J3MGT_TX0_NJB3A-29Transfer
J4MGT_TX0_PJB3A-31Transfer
J5MGT_RX0_NJB3A-30Receive
J6MGT_RX0_PJB3A-32Receive


Test Points

Scroll Title
anchorTable_SIP_TestPoint
titleTest Points Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Test Point

Signals

B2B Connector

Notes
TP 1VBAT_IJB3-124
TP 2OTG2_IDJB1-22
TP 3OTG1_IDJB1-34
TP 4USB1_VBUSJB1-36
TP 5USB2_VBUSJB1-24
TP 6M_TCKJB3-81
TP 7M_TDOJB3-88
TP 8M_TDIJB3-87
TP 9M_TMSJB3-82
TP 10TCKJB3-141
TP 11TDOJB3-148
TP 12TDIJB3-147
TP 13TMSJB3-142
TP 14VINJB1-165...168
TP 155V-
TP 163.3V_CPLDJB1-147...148
TP 17-18GND-


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs

...

Power supply with minimum current capability of 3 A 3A for system startup is recommended.

...

Power Distribution Dependencies

12V Power Supply power supply (VIN) on J9/J11 (2 mm MC LB2-A solder-in) or on J10 (TE1.5/2-3.5H).

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore
scroll-pdffalse
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision7
diagramNameTEBT0784_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641
|


Scroll Only

Image RemovedImage Added


Power-On Sequence

Scroll Title
anchorFigure_PWR_PS
titlePower Sequency


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision79
diagramNameTEBT0782_PWR_PS
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only


...

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


Power Rail Name

B2B

JM1

JB1 Pin

B2B

JM2

JB2 Pin

B2B JM3

B2B JB3 Pin

DirectionNotes
VIN165, 166, 167, 168--Input/OutputDirectly to module
3.3V_M99, 100, 111,112, 123, 124, 135, 136, 159, 160, 169, 170, 171, 172-99, 100, 159, 160Input/Output160, 169, 170, 171, 172 are output other ones input for IO Banks
3.3V_CPLD147,148--OutputDirectly to module
1.8V_M-99,100, 159, 160, 169, 170, 171, 172124Input/Output169, 170, 171, 172 are output other ones input for IO Banks
VBAT_IN





Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.
  • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors

    Include Page
    6 x 6 SoM LSHM B2B Connectors
    PD:6 x 6 SoM LSHM B2B ConnectorsPD:6 x 6 SoM LSHM B2B Connectors

Include Page
8.5 x 8.5 SoM QSH and QTH B2B Connectors
8.5 x 8.5 SoM QSH and QTH B2B Connectors
The TEBT0782 has three 160-pin double-row ASP-122953-01  Samtec connectors which mate with ASP-122952-01 Samtec connectors on the module. Mating height is 5 mm.

Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titlePS absolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnitNote
VINInput supply
voltage
012
voltage----V

Attention: Depends on connected module!

171050601 of the TEBT0782  (-0,3V - 40V)

V

T_STGStorage Temperature-40+85°CDIP Switch S1


Recommended Operating Conditions

...

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ParameterMinMaxUnitsReference Document
VIN
12
11.412.6V

Attention: Depends on connected module! See TE078x TRMs, recommended normally 12V

Without module: 171050601 of the  TEBT0782  (6V - 36V)

T_OPT-40+85°C


Physical Dimensions

  • Module size: 116 mm × 116 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 5 mm.

...

Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1
diagramNameTEBT0782_TS_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Modified


Currently Offered Variants 

...

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionChangesDocumentation Link
2016-11-0501-Initial ReleaseREV01


Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Scroll Title
anchorFigure_RV_HRN
titleBoard hardware revision number.


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision34
diagramNameTEBT0782_RH_HRN
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth160203


Scroll Only


Document Change History

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

change list

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse

Page info

infoTypeModified by
typeFlat
showVersionsfalse
infoTypeModified by
typeFlat
showVersionsfalse

  • update power section

2019-10-8v.45John Hartfiel
  • update power section

  • XMOD section
2019-10-16v.44Pedram Babakhani
  • Initial Release

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --