Page History

...

Key Features

• Xilinx XC7Z SoC (XC7Z020 or XC7Z014S)
  - Processing System
  • Processing system (PS):
    
    • XC7Z020: Dual-core ARM Cortex-A9
  
       Unified 512 KByte L2 cache
       256 KByte on-chip memory
  - Programmable Logic
  • • MPCore™ with CoreSight™
    • XC7Z014S: Single-core ARM Cortex-A9 MPCore™ with CoreSight™
    • L1 cache: 32 KByte instruction, 32 KByte data per processor
    • L2 cache: Unified 512 KByte
  • Programmable logic (PL): Artix-7 FPGA
         85 K
    • • Programmable logic cells
    
         560 KByte extensible block RAM (140x 36 Kbit BRAM blocks)
         220 programmable DSP slices
         Dual 12-bit 1Msps AD converter
  • 54 multiplexed I/O pins (MIOs)
  • • • :
        
        • XC7Z020: 85K, XC7Z014S: 65K
      • Block RAM:
        • XC7Z020: 4.9 MByte, XC7Z014S: 3.8 MByte
      • DSP slices:
        • XC7Z020: 220, XC7Z014S: 170
      • Peak DSP performance:
        • XC7Z020: 276 GMACs, XC7Z014S: 187 GMACs
      • 2x 12 bit, MSPS ADCs with up to 17 Differential Inputs
  • 54 multiuse I/O (MIO) pins
  • 152 High-Range (HR) 152 I/O pins (SelectIO interfaces)
  • System Controller CPLD (Lattice LCMXO2-1200HC)
  • 1 GByte DDR3/L memory, 2 x 256 Mbit x 16 (32-bit wide)
  • 32 MByte Quad SPI Flash memory
  • Gigabit Ethernet transceiver PHY (Marvell 88E1512)
  • MAC address serial EEPROM with EUI-48™ node identity (11AA02E48)
  • Highly integrated full-featured hi-speed USB 2.0 ULPI transceiver (Microchip USB3320C-EZK)
  • 3-axis accelerometer and 3-axis magnetometer (ST Microelectronics LSM303DTR) (Optional!) 
  • Real time clock with embedded crystal (Intersil ISL12020M): ±5ppm accuracy
  •  Atmel CryptoAuthentication element (Atmel ATSHA204A)
  • Up to 32 GByte eMMC, usually 4 GByte, depends on module variant and assembly option
  • User LED 1 (Green), user LED 2 (Red), user LED 3 - FPGA DONE (Green)
  • 1.5A, PowerSoC DC-DC step-down converter (Enpirion EP53F8QI) for 1.8V power supply
  • 1.5A, PowerSoC DC-DC step-down converter (Enpirion EP53F8QI) for 1.5V power supply
  • (Red), user LED 3 - FPGA DONE (Green)
  • On-board high-efficiency DC-DC converters for all voltages used4A PowerSoC DC-DC step-down converter (Enpirion EN6347) for 1.0V power supply
  • Trenz 4 x 5 module socket connector connectors (3 x Samtec LSHM series connectors)
  • Evenly-spread supply pins for good signal integrity
  • Rugged for shock and high vibration

  Additional assembly options are available for cost or performance optimization upon request.

  ...

  PS I/O signal connections between Zynq SoC's I/O banks and B2B connectors, 14 total.

  Bank	Type	Voltage	B2B	I/O Count	Notes
  500	MIO	3.3V	JM1	8
  501	MIO	1.8V	JM1	6	SD0

  
  

  For detailed information about the pin-out, please refer to the Pin-out tables. 

  ...