Versions Compared

Old Version 41

changes.mady.by.user Jan Kumann

Saved on

compared with

New Version 42

changes.mady.by.user Jan Kumann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Scroll Only (inline)
Refer to https://wiki.trenz-electronic.de/display/PD/TE0720+TRM for online version of this manual and additional technical documentation of the product.
 
The Trenz Electronic TE0720 is an industrial-grade SoM (System on Module) based on Xilinx Zynq-7000 SoC (XC7Z020) with up to 1 GB of DDR3/L SDRAM, 32MB of SPI flash memory, Gigabit Ethernet PHY transceiver, a USB PHY transceiver and powerful switching-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips. See also Variants Currently in Production section.

...

  • Xilinx XC7Z SoC (XC7Z020 or XC7Z014S)
    • Processing system (PS):
      • XC7Z020: Dual-core ARM Cortex-A9 MPCore™ with CoreSight™
      • XC7Z014S: Single-core ARM Cortex-A9 MPCore™ with CoreSight™
      • L1 cache: 32 KByte instruction, 32 KByte data per processor
      • L2 cache: Unified 512 KByte
    • Programmable logic (PL): Artix-7 FPGA
      • Programmable logic cells:
        85K (XC7Z020: 85K), 65K (XC7Z014S: 65K)
      • Block RAM: XC7Z020: 4.9 MByte (XC7Z020), XC7Z014S: 3.8 MByte (XC7Z014S)
      • DSP slices:XC7Z020: 220, XC7Z014S: 170  220 (XC7Z020), 170 (XC7Z014S)
      • Peak DSP performance: XC7Z020: 276 GMACs (XC7Z020), XC7Z014S: 187 GMACs (XC7Z014S)
      • 2x 12 bit, MSPS ADCs with up to 17 Differential Inputs
  • 54 multiuse I/O (MIO) pins
  • 152 High-Range (HR) I/O pins (SelectIO interfaces)
  • System Controller CPLD (Lattice LCMXO2-1200HC)
  • 1 GByte DDR3/L memory, 2 x 256 Mbit x 16 (32-bit wide)
  • 32 MByte Quad SPI Flash memory
  • Gigabit Ethernet transceiver PHY (Marvell 88E1512)
  • MAC address serial EEPROM with EUI-48™ node identity (11AA02E48)
  • Highly integrated full-featured hi-speed USB 2.0 ULPI transceiver (Microchip USB3320C-EZK)
  • 3-axis accelerometer and 3-axis magnetometer (ST Microelectronics LSM303DTR) (Optional!) 
  • Real time clock with embedded crystal (Intersil ISL12020M): ±5ppm accuracy
  •  Atmel CryptoAuthentication element (Atmel ATSHA204A)
  • Up to 32 GByte eMMC, usually 4 GByte, depends on module variant and assembly option
  • User LED 1 (Green), user LED 2 (Red), user LED 3 - FPGA DONE (Green)
  • On-board high-efficiency DC-DC converters for all voltages used
  • Trenz 4 x 5 module socket connectors (3 x Samtec LSHM series connectors)
  • Evenly-spread supply pins for good signal integrity
  • Rugged for shock and high vibration

...