Page History

...

• VCCIO voltage selection jumpers are all set to 1.8 V.
• S2 switch configured as reset button.
• One VG96 connector is (not soldered to the board, but is included in the package as separate component.)

Different delivery configurations are available upon request.

...

Micro SD Card socket is not directly wired to the B2B connector pins, but routed through a Texas Instruments TXS02612 SDIO port expander, which is needed for voltage translation due to the different voltage levels of the Micro SD Card and MIO bank 501 of the Xilinx Zynq 7000 chip. The Micro SD Card has 3.3 V signal voltage-level, but the MIO Bank 501 on the Xilinx Zynq 7000 chip is set to 1.8 V8V.

Ethernet

The TE0706-02 is equipped with a Marvell Alaska 88E1512 Gigabit Ethernet PHY (U6), which provides in conjunction with Gigabit Ethernet MagJack J2 a 1000Base-T Ethernet interface. The I/O Voltage is fixed at 1.8V. The reference clock input of the PHY is supplied by on-board 25MHz oscillator (U7).

...

...