Page History
...
The TE0706-02 is equipped with a Marvell Alaska 88E1512 Gigabit Ethernet PHY (U6), which provides in conjunction with the Gigabit Ethernet MagJack J2 a 1000Base-T Ethernet interface. The I/O Voltage is fixed at 1.8V. The reference clock input of the PHY is supplied by on-board 25MHz oscillator (U7).
...
TE0706-02 board has one physical USB type A socket J7 routed to B2B connector JB3. The corresponding USB - transceiver on 4 x 5 SoMs varies in order of the used SoM model.
...
| Connector Designator | Connector Type | Count of IO's | Count of LVDS Pairs | Available VCCIO's | Available Control Lines and Signals |
|---|---|---|---|---|---|
| J5 | 50-pin IDC male | 40 | 16 | 3.3V, | LEDs of Ethernet MagJack J2, MIO0,MIO9...MIO15 of the Zynq module |
| J6 | VG96-Connector | 82 | 41 | 3.3V, | LEDs of Ethernet MagJack J3, PGOOD-, NOSEQ-Signal of SC-CPLD ofmounted 4 x 5 SoM's SC-CPLD |
Table 4: Pin-assignment of connector J5 and J6
On-board Peripherals
Gigabit Ethernet PHY
On-board Gigabit Ethernet PHY is provided with Marvell Alaska 88E1512 IC (U8). The Ethernet PHY RGMII interface is connected to the Zynq Ethernet0 PS GEM0. I/O voltage is fixed at 1.8V for HSTL signalling. The reference clock input of the PHY is supplied from an on-board 25.000000 MHz oscillator (U7), the 125MHz output clock signal CLK_125MHZ is connected to the pin G13 of the System Controller CPLD chip (U19).
Power and Power-On Sequence
...
Overview
Content Tools