Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Warning

Watchdog do not work correctly on all modules with Firmware released before 2017.0708.1022. Please update Firmware on CPLD. For questions, write to Trenz Electronic support.

2 Firmware variants with swapped external reset input and output available.

Image Added

Figure1: Firmware for TEB0729 without modification,

  • J2-89 externel reset input
  • J2-91 external reset output
Image Added

Figure2: Firmware for TEB0729 with modification,

  • J2-89 external reset output
  • J2-91 externel reset input

 

Feature Summary

  • Boot Mode
  • JTAG connection
  • Power Management
  • Watchdog Management

...

Name / opt. VHD NameDirectionPinDescription
BOARD_STATout23STATUS to B2B
BOOT_MODE1in28Boot Mode Pin from B2B
BOOT_MODE2in27Boot Mode Pin from B2B
BOOT1out13Boot Mode Pin to FPGA (MIO4)
BOOT2out12Boot Mode Pin to FPGA (MIO5)
EN_3V3out25Enable 3.3V Switch
F_TCKout8JTAG to FPGA
F_TDIout9JTAG to FPGA
F_TDOin11JTAG from FPGA
F_TMSout10JTAG to FPGA
FPGA_IOout5Status to FPGA
JTAGSEL---26Enable JTAG access to CPLD for Firmware update (zero: JTAG routed to FPGA, one: CPLD access)
nRSTininout16Reset from B2BExternal Reset. Direction Firmware depends
nRST_INoutinout4Manual Watchdog Reset (also available on B2B)External Reset. Direction Firmware depends
PS_POR_Bin14Reset from Watchdog to FPGA
TCKin30JTAG from B2B
TDIin32JTAG from B2B
TDOout1JTAG to B2B
TMSin29JTAG from B2B
WD_ENin21Watchdog  PL I/O
WD_HITin20Watchdog  PL I/O
WDIout17Watchdog trigger to external Watchdog IC

...

Revision Changes

CPLD REV01 to REV02

  • Bugfix for TE0729-REV02 Watchdog support
  • Add 2 Variants for TEB0729-REV02 and TE0729-REV02_MOD support
  • Change Pin FGPA_IO direction
  • Change Pin BOARD_STAT output configuration

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

...

Include Page
IN:Legal Notices
IN:Legal Notices