Page History
...
Table 1: Initial state of programmable devices on delivery of the module.
Boot Process
By default the TE-0720 supports QSPI and SD Card boot modes which is controlled by the MODE input signal from the B2B JM1 connector.
MODE Signal State | Boot Mode |
|---|---|
High or open | SD Card |
Low or connected to the ground | QSPI |
Table 14: Boot modes.
Signals, Interfaces and Pins
...
Table 13: I2C slave device addresses.
Boot Process
By default the TE-0720 supports QSPI and SD Card boot modes which is controlled by the MODE input signal from the B2B JM1 connector.
...
MODE Signal State
...
...
High or open
...
SD Card
...
Low or connected to the ground
...
QSPI
Table 14: Boot modes.
On-board Peripherals
System Controller CPLD
...
Date | Revision | Contributors | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jan Kumann | Initial document. |
...
Overview
Content Tools