Page History

...

• Xilinx XC7Z SoC (XC7Z020 or XC7Z014S)
  • Processing system (PS):
    
    • XC7Z020: Dual-core ARM Cortex-A9 MPCore™ with CoreSight™
    • XC7Z014S: Single-core ARM Cortex-A9 MPCore™ with CoreSight™
    • L1 cache: 32 KByte instruction, 32 KByte data per processor
    • L2 cache: Unified 512 KByte
  • Programmable logic (PL): Artix-7 FPGA
    • Programmable logic cells: 85K (XC7Z020), 65K (XC7Z014S)
    • Block RAM: 4.9 MByte (XC7Z020), 3.8 MByte (XC7Z014S)
    • DSP slices:  220 (XC7Z020), 170 (XC7Z014S)
    • Peak DSP performance: 276 GMACs (XC7Z020), 187 GMACs (XC7Z014S)
    • 2x 12 bit, MSPS ADCs with up to 17 differential inputs
• 54 multiuse I/O (MIO) pins
• 152 High-Range (HR) I/O pins (SelectIO interfaces)
• System Controller CPLD (Lattice LCMXO2-1200HC)
• Up to 1 GByte DDR3/L SDRAM memory , (2 x 256 Mbit x 16 (, 32-bit wide data bus). See also variants table.
• 32 MByte Quad SPI Flash memory
• Gigabit Ethernet transceiver PHY (Marvell 88E1512)
• MAC address serial EEPROM with EUI-48™ node identity (11AA02E48)
• Highly integrated full-featured hi-speed USB 2.0 ULPI transceiver (Microchip USB3320C-EZK)
• 3-axis accelerometer and 3-axis magnetometer (ST Microelectronics LSM303DTR) (Optional!) 
• Real time clock with embedded crystal (Intersil ISL12020M): ±5ppm accuracy
•  Atmel CryptoAuthentication element (Atmel ATSHA204A)
• Up to 32 GByte eMMC, usually 4 GByte, depends on module variant and assembly option
• User LED 1 (Green), user LED 2 (Red), user LED 3 - FPGA DONE (Green)
• On-board high-efficiency DC-DC converters for all voltages used
• Trenz 4 x 5 module socket connectors (3 x Samtec LSHM series connectors)
• Evenly spread supply pins for good signal integrity
• Rugged for shock and high vibration

...