Page History
HTML |
---|
<!-- Template Revision 1.563 (HTML comment will not display, it's not needed to remove them. For Template/Skeleton changes, increase Template Revision number. So we can check faster, if the TRM style is up to date) --> |
...
Power and Power-On Sequence
Power
...
Single 3.3V power supply with minimum current capability of 4A for system startup is recommended.
Power Consumption
...
Table 11: Typical power consumption.
...
Consumption
The maximum power consumption of a module mainly depends on the design running on the FPGA.
Xilinx provide a power estimator excel sheets to calculate power consumption. It's also possible to evaluate the power consumption of the developed design with Vivado. See also Trenz Electronic Wiki FAQ.
Power Input | Typical Current |
---|---|
VIN | TBD* |
3.3VIN | TBD* |
Table 11: Typical power consumption.
* TBD - To Be Determined.
Single 3.3V power supply with minimum current capability of 4A for system startup is recommended.
For the lowest power consumption and highest efficiency of the on-board DC-DC regulators it is recommended to power the module from one single 3.3V supply. All input power supplies should have a nominal value of 3.3V. Although the input power supplies can be powered up in any order, it is recommended to power them up simultaneously.
Warning |
---|
To avoid any damage to the module, check for stabilized on-board voltages should be carried out(i.e. power good and enable signals) before powering up any SoC's I/O bank voltages VCCO_x. All I/Os should be tri-stated during power-on sequence. |
Page break |
---|
Power-On Sequence
...