Page History
...
By default the ... supports QSPI and SD Card boot modes which is controlled by the MODE input signal from the B2B connector JM..
High or open | SD Card |
Low or ground | QSPI Interface |
Table 2: Selecting power-on boot device.
...
| I2C Device | Slave Address | Notes |
|---|---|---|
| Si1143-A11-GMR | 0x5A | Proximity and ambient light sensor. |
Power and Power-On Sequence
Power Consumption
The maximum power consumption of the module mainly depends on the design running on the Zynq SoC's FPGA.
Xilinx provide a power estimator excel sheets to calculate power consumption. It is also possible to evaluate the power consumption of the developed design with Vivado. See also Trenz Electronic Wiki FAQ.
| Power Input | Typical Current |
|---|---|
| 3.3V | TBD* |
Table : Typical power consumption.
* TBD - To Be Determined.
Power supply with minimum current capability of 1A for system startup is recommended.
Variants Currently in Production
Technical Specifications
Absolute Maximum Ratings
...
Overview
Content Tools