Page History
...
| Info |
|---|
2 Firmware variants with swapped external reset input and output direction are available. See Watchdog section of this document. Firmware (SC729_rev02plus.jed) for J2-89 as external reset output and J2-91 as external reset input will be used as default firmware. |
| Warning |
|---|
Watchdog do not work correctly on all modules with Firmware released before 2017.08.22. Please update Firmware on CPLD. For questions, write to Trenz Electronic support. |
...
Figure1: Firmware (SC729_rev02org.jed) for TEB0729 without HW modification,
|  Figure2: Firmware (SC729_rev02plus.jed) for TEB0729 with HW modification,
|
B2B Control:
2 Variant available,depends on carrier board connection, see Figure 1 and 2. The swapped signals and nRST_IN pulse limitation on variant 1 are the only difference between this two variants.
...
| Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| REV02 | REV02/REV02plus |
|
| ||||||||||||||||||||||
| 2017-08-23 | v.13 | REV02 | REV02/REV02plus | John Hartfiel |
| ||||||||||||||||||||||
| 2017-06-07 | REV02 | REV02/REV02plus |
|
| |||||||||||||||||||||||
| All |
|
...
Overview
Content Tools