Page History
...
| HTML |
|---|
<!-- Wiki Link: Go to Base Folder of the Module or Carrier, for example : https://wiki.trenz-electronic.de/display/PD/TE0712 --> |
| Scroll Only (inline) |
|---|
Refer to httpshttp://wiki.trenz-electronic.de/display/PD/<name>org/tem0002-info for the current online version of this manual and other available documentation. |
The Trenz Electronic TEM0002-01 SmartBerry with Raspberry Pi form factor, is an industrial-grade module based on Microsemi SmartFusion2 SoC (System on a Chip). The Module has 128MB DDR3 SDRAM, a Gigabit Ethernet PHY, four Pmods, a GPIO Pin header compatible to the Raspberry Pi pinout and a Micro USB to UART interface. SmartFusion2 combines a 166 MHz Cortex-M3 core with 256 KByte Flash, 80 KByte SRAM and a 12 kLUT FPGA core logic.
...
| Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
- Microsemi SmartFusion2 SoC FPGA, U2
- USB to UART/FIFO (FTDI FT2232H), U3
- Gigabit ETH connector, J2
- 4x 2x6 pin Pmod, P1, P2, P3, P4
- GPIO pin header compatible to Raspberry Pi, J8
- Micro USB 2.0, J1
- EEPROM 4KBIT (M93C66-R), U6
- 2x User Button, S4, S5
- RGB LED, D3
- LED red, D1 and green, D2
- Live Probe pins, J4
- Reset jumper, J13
- JTAG select jumper, J6
- Board power header, J5
- 1Gb DDR3/L SDRAM, U5
- MicroSD memory card connector, J3
- Gigabit Ethernet PHY, U1
...
Overview
Content Tools