Page History
...
The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) compatible with based on VITA 57.1 FMC HPC Standard, with four SFP+ 10Gb fiber optical (850nm) ports. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.
Key Features
- VITA 57.1 FMC HPC standard compatible
- Four SFP+ 10Gb (850nm) ports
- HPC FMC connector
- Low jitter programmable clock generator
- Intel(Altera) Max10 FPGA 10M08SAU169C8G
- Status LED (green)
...
Physical Dimensions
Module size: ... 69 mm × ... mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: ... mm.
84 mm, SFP+ conector excluded (+ 5.5 mm). See Vita 57.1 standard.
PCB thickness: 1.6 PCB thickness: ... mm.
Highest part on PCB : approx. ... mmtop is 9.5 mm (SFP+ cage, excluded front plate), bottom 1.4 mm (MAX10 FPGA). Please download the step model for exact numbers.
...
Figure : Module physical dimensions drawing.
| Note |
|---|
Mounting holes near the front pannel are due to physical restrictions caused by the cage, not implemented. The dimensions exceed in some area the by Vita 57.1 standard defined dimensions. In the middle region of the card the cage is higher than the specified max high for this area. The bottom side is at the high limit. |
Revision History
Hardware Revision History
...
Overview
Content Tools